-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
Stereo Turntable with Built-in speaker and real
wooden legs
ATT-101BT
INSTRUCTION MANUAL
EN-ENGLISH
SAFETY INSTRUCTIONS
Read these safety instructions before using your device and store them for possible future
reference.
This product must be positioned in a sufficiently stable location, it can be potentially
hazardous due to falling when mounted and can cause injury, particularly to children
if it positioned incorrectly.
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capacity. Persons who have not read the manual, unless
they have received explanations by a person responsible for their safety and
supervision should not use this unit.
Do not plug several devices into the same outlet. Doing so may cause the outlet to
overheat and start a fire. Make sure the outlet is readily accessible during operation of
the equipment.
Unplug this product during lightning storms or when unused for long periods of time.
Not doing so may result in fire or electric shock.
Do not cover the ventilation openings of the product with items such as newspapers,
tablecloths, curtains etc. or insert objects into the slots available on the products. As
this could result in the product temperature rising and could cause a fire.
Only use accessories outlined and recommended by the manufacturer
High audio volume and no more than one hour per day at medium audio volume.
Always leave a minimum distance of 10 cm around the unit to ensure sufficient
ventilation.
At full volume, prolonged listening to the portable audio device may damage the
user’s hearing and cause hearing troubles (temporary or permanent deafness, hearing
drone, tinnitus, hyperacusis). So we recommend not to listen to the portable audio
device at high audio volume and no more than one hour per day at medium audio
volume.
INTERFERENCE
All wireless devices are susceptible to interference which may affect their performance.
AUTHORISED PERSONNEL
Only qualified people are authorized to install or repair this product
ACCESSORIES
Only use chargers and other accessories which are compatible with this equipment. Do
not connect incompatible products.
KEEP THE EQUIPMENT DRY
This equipment is not water proof. Keep it dry.
CHILDREN
Keep your device in a safe place, out of the reach of young children. The device contains
small parts that may present a choking hazard.
FUNCTIONS
3-speed (33 1/3, 45 and 78 RPM)
Built-in stereo speakers for great sound
High quality ceramic cartridge produces detailed sound
2
EN-ENGLISH
Belt driven turntable mechanism
Play 7", 10" & 12" Records
AUTO-STOP tone arm
Aux in
RCA audio out
Bluetooth in
Bluetooth out
SD card reader & USB flash driver
Record vinyl to SD card or USB drive
DESCRIPTION
3
EN-ENGLISH
1. Platter
2. 45rpm adaptor
3. Tonearm
4. Lift lever
5. Speed selector（33 1/3, 45 and 78 RPM）
6. Auto stop control
7. Tone-arm rest/ lock
8. Cartridge
9. Power Switch/Volume control
10. BT Launch Indicator light (Power light)
11. Earphone jack
12. USB connector
13. SD card connector
14. Mode: REC/USB/SD/Bluetooth /Bluetooth out selection button
15. Next track
16. Pause/play button/DEL
17. Previous track
18. Aux-in
19. Line out
20. DC power jack
INITIAL SET-UP
MAIN CONNECTIONS
Ensure that the mains voltage of your home corresponds to the operating voltage of the
unit. Your unit is ready to be connected to a mains voltage of 5V DC adaptor.
CONNECTING TO AN EXTERNAL SOUND SYSTEM
Should you wish to connect the turntable to an external amplifier follow the below steps.
Connect an RCA audio cable (not supplied) to the AUDIO LINE OUT sockets on the rear
of the turntable.
Note: Take care to match the RED/WHITE plugs to the corresponding RED/WHITE sockets.
Connect the other end of the cable to an AUDIO INPUT on the amplifier (check your
amplifier user manual if you are not sure).
The volume control on the turntable will have no effect on the volume level when
connected this way. All volume controls should be operated from the amplifier.
Note: Turn the volume on the turntable all the way down, so it does not interfere with the
external sound system.
Playing a record
Before use, ensure the security wire (tone-arm rest/lock) and the cartridge protector
(stylus/cartridge) have been removed. And the tone-arm lock is released.
Place a record on the turntable platter.
Select the speed required using the speed selector switch.
Raise the tone-arm using the tone-arm lift lever. As you move the tone-arm towards
the record the turntable begins spinning. Lower the needle gently onto the outer edge
of the record using the tone-arm lift lever.
Rotate the ON/OFF/Volume control knob to increase or decrease the volume level.
When a record comes to the end, the turntable will stop automatically if the auto-stop
switch is in the “ON” position
4
EN-ENGLISH
If the switch is in the off position then it will keep revolving all the time.
Lift up the tone arm and put it on the rest when finished.
Replace the protective cap on the stylus and close the tone arm lock.
Turn off power at mains.
USB flash drive and SD card reader Recording
(Lift up the tone arm and put it on the rest.)
LISTEN TO MUSIC:
If you want to play music from your installed SD card or USB flash memory, turn the
power & volume control knob clockwise to power on; the music will start playing
automatically.
You can play or pause music by pressing the play-pause/Del button.
If you want to play the next or previous track from your installed SD card or USB flash
memory, press the next track or previous track button.
If you have installed an SD card & USB flash memory, the last one installed will start
playing. You can select the desired source by pushing the MODE/REC button. (SD =>
USB). The mode button will select the active/installed sources only. Only mp3 file
format is supported.
Note: the tone arm must be in rest position.
RECORDING MUSIC:
You can convert your vinyl records into digital mp3 files by inserting an SD/MMC card in
the SD/MMC card reader slot or USB flash memory device into the USB port.
Play your ‘vinyl’ music, as described in ‘listening to a record’.
Press and hold the MODE/REC button for 2 seconds.
You will hear one ‘short beep’, indicating that recording has started.
When finished recording, press “MODE/REC” for 2 seconds to stop recording.
You will hear 2 ‘short beeps’, indicating that the recording has stopped.
The recorded songs will be saved in the “RECORD” folder as mp3 file, in 128 kbps.
Long press the MODE/REC button, you can switch to the “RECORD” folders to play the
recorded music.
DELETE RECORDED MUSIC:
If you want to delete the song being played from your USB flash memory or SD/MMC card,
long press the play-pause/Del button. You will hear 2 “short beeps” confirming that the
song being played has been deleted.
Bluetooth function
（Lift up the tone arm and put it on the rest）
Press “MODE/REC” button to select Bluetooth mode.
Open up your Bluetooth settings and search for “ATT-101BT” to connect.
A sound prompt will indicate connection.
Under this function, turntable function will be stopped automatically.
Bluetooth out function
Rotate the ON/OFF control knob, and thrice click the Mode button, the Bluetooth
indicator will flash blue quickly.
Place a record on the turntable platter, or insert a SD/MMC card in the SD/MMC card
5
