Znaleziono w kategoriach:
Telewizor HAIER H65S80FUX 65" QLED 4K DLG-120Hz Google TV HDMI 2.1

Instrukcja obsługi Telewizor HAIER H65S80FUX 65" QLED 4K DLG-120Hz Google TV HDMI 2.1

Wróć
Inspired Living
User Manual
MODELS:
H50S80FUX
H55S80FUX
H65S80FUX
Illustration in this guide are provided
for reference only and may differ
from actual product appearance.
Product design and specification may
be changed without notice.
LED Television
H75S80FUX
1
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in
accordance with the instructions.
8) Do not install near any heat sources such as radiations,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized plug. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protected the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Unplug this apparatus during lighting storms or when
unused for long periods of time.
13) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
14) Mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
15) The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
table-cloth, curtains, etc.
16) No naked flame sources, such as lighted candles,
should be placed on the apparatus.
17) Attention should be drawn to the environmental aspects
of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
20) warning:To avoid any injury caused by lean of the
product, please always ensure the whole product was
placed within the table surface in horizontal.
*Actual product may vary in appearance from above
image*
Where a plug on the power supply cord is used as the
disconnect device, the installation instructions shall state that
for pluggable equipment, the socket-outlet shall be easily
accessible.
CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The symbol indicates that dangerous voltages
constituting a risk of electric shock arc present
within this unit.
The symbol indicates that there are important
operating and maintenance instructions in the
litcraturaccompanying this unit.
WARNING:
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
WARNING:
The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
Don't disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a Battery.
To avoid battery subjected to extremely low air pressure.
This symbol indicates that this product incorporates
double insulation between hazardous mains voltage and
user accessible parts. When servicing use only identical
replacement parts.
This marking indicates that this product should not be
disposed with other household wastes.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle itresponsibly to
promote the sustainable reuse of material resources. To
return your used device, please use the return and collection
systems or contact the retailer where the product was
purchased. They can take this product for environmental safe
recycling.
The terms HDMI, HDMI High-Definition Multimedia
Interface, HDMI Trade dress and the HDMI Logos are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing
Corporation.
2
IMPORTANT SAFETY INSTRUCTIONS
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set. Refer
servicing to qualified service personnel.
To prevent fire or electrical shock hazard, do not expose the
television receiver to rain or moisture.
Do not drop or push objects into the television cabinet slots
or openings. Never spill any kind of liquid on the television
receiver.
Do not block the ventilation holes in the back cover. Adequate
ventilation is essential to prevent failure of electrical
components.
Do not trap the power supply cord under the television receiver.
If you are going to clean the product, Unplug the TV, use soft
fabric, no water,never chemicals.
Never stand on, lean on, or suddenly push the television or its
stand. You should pay special attention to children. Serious
injury may result if it falls.
Do not place your television on an unstable cart, stand, shelf
or table. Serious injury to an individual, and damage to the
television, may result if it falls.
When the television receiver is not used tor an extended
period of time, it is advisable to disconnect the AC power cord
from the AC outlet.
Avoid exposing the television receiver to direct sunlight and
other sources of heat. Do not stand the television receiver
directly on other products which give off heat, e.g. video
cassette players and audio amplifiers. Do not place naked
flame sources, such as lighted candles on the television.
Minimum distances
10cm 10cm 5cm
20cm
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and can
also be dangerous.
Note:the use of apparatus in moderate climates.
Caution:
A television set may fall, causing serious personal injury or
death. Many injuries, particularly to children, can be avoided
by taking simple precautions such as:
- ALWAYS use cabinets or stands or mounting methods
recommended by the manufacturer of the televisionset.
- ALWAYS use furniture that can safely support the television
set.
- ALWAYS ensure the television set is not overhanging the
edge of the supporting furniture.
- ALWAYS educate children about the dangers of climbing on
furniture to reach the television set or its controls.
- ALWAYS route cords and cables connected to your
television so they cannot be tripped over, pulled or grabbed.
- NEVER place a television set in an unstable location.
- NEVER place the television set on tall furniture (for
example, cupboards or bookcases) without anchoring both
the furniture and the television set to a suitable support.
- NEVER place the television set on cloth or other materials
that may belocatedbetween the televisionset and supporting
furniture.
- NEVER place items that might tempt children to climb, such
as toys and remote controls, on the top of the television or
furniture on which the television is placed.
If the existing television set is going to be retained and
relocated, the same considerations as above should be applied.
3
PREPARATION
IMPORTANT: Do not apply pressure to the screen display
area which may compromise the integrity of the display.
The manufacturer's warranty does not cover user abuse or
improper installations.
ATTACHING THE STAND
IMPORTANT: The stand of the TV must be assembled prior to
usage.
1. Place TV unit face down on a soft and flat surface
(blanket, foam, cloth, etc.) to Prevent any damage to the
TV.
2. Fix the stand to the bottom of the TV with the 4 screws.
NOTE
The appearance of the product shall be in kind.
PREPARING YOUR LED TV FOR WALL MOUNTING
We suggest that you keep your TV at least 2.36 inches (60
mm) from the wall to prevent cable interference. Before
mounting your TV on the wall, you need to remove the stand.
For your safety, please use only with a UL listed wall mount
bracket with minimum weight of the TV without stand.
To attach a wall mount bracket to your TV:
1. Remove the screws holding your TV to the stand.
2. Remove the stand from your TV.
3. Secure the wall mount bracket to the back of your TV
using four screws. Follow the instructions of the user
manual that came with the wall mount bracket to install.
NOTE
The wall mount bracket are not included.
4. Fix the wall mount screws (M6x1 2mm/4pcs) into the
rear side of the LEDTV, using the torque of 12kgf,cm.
TURNING ON THE TV
1. Install the stand and place the TV on a solid surface.
NOTE
Ensure that the TV is placed in a position to allow free
flow of air. Do not cover the ventilation openings on
the back cover.
To prevent any unsafe situations, no naked flame
sources, such as lighted candles, should be placed on
or in the vicinity.
Avoid heat, direct sunlight and exposure to rain or
water. The equipment shall not be exposed to dripping
or splashing.
2. Connect the antenna cable or cable TV cable to the ANT
IN aerial socket on the back of the TV set.
3. Remote control:
Remove the cover of the battery compartment. Insert
2 batteries (Type AAA 1.5V).
CAUTION: Risk of fire explosion if the battery is replaced
by an incorrect type.
4. Power:
Plug the cord into a working power outlet.
5. Turn the TV on:
Press on the remote control or POWER button on the
side control panel of the TV.
4
PERIPHERAL CONNECTION AND CONTROLS
BUTTON CONTROL
In standby mode, press the button to turn on the TV.
In the power on state, press the button to turn off the TV.
PERIPHERAL CONNECTION
All the terminals are(from left to right):
LAN, OPTICAL, VIDEO, L, R, HDMI4, HDMI3, HDMI2
ACCESSORIES
Remote Control -1 pcs
User's Manual - 1 pcs
Screws - 4 pcs
Quick Start Guide -1 pcs
All the terminals are(from left to right):
HDMI1(eARC/ARC), SATELLITE, ANT/CABLE, USB,EARPHONE
COMMON INTERFACE(CI).
Warranty Card -1 pcs

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 41 287 500,00 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756