-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
E
F
D
GB
Operating Instructions
Bedienungsanleitung
Mode d‘emploi
Instrucciones de uso
Gebruiksaanwijzing
Istruzioni per l‘uso
Instrukcja obsługi
Használati útmutató
Manual de utilizare
Návod k použití
Návod na použitie
Manual de instruções
Bruksanvisning
Руководство по эксплуатации
Работна инструкция
Οδηγίες χρήσης
Kullanma kılavuzu
Käyttöohje
NL
PL
RO
CZ
SK
P
S
RUS
BG
GR
TR
FIN
I
H
WiFi Wall Light
WiFi-Wandleuchte
Link to App
de.hama.com/smarthome#smart-solution
00176606
00176607
2
Pic 2
Pic 1
3
4
Important information
- Quick-reference
guide:
•This quick-reference guide contains the most
important basic information, such as safety
instructions and the steps necessary to operate
the product.
•The full text
of the
manual is available at the
following internet address:
www.hama.com -> 00176606, 00176607
-> Downloads
•Save the manual on your computer for reference
and print it out if possible.
1. Explanation of symbols used on the
product label
Electrical device of safety
class II.
Protection against electric shock
thanks to reinforced or double
insulation of live parts.
The product must only be used
with alternating current.
Non-dimmable.
The lamp is not suitable for use
with a conventional dimmer.
The article may only be con-
nected by a qualied electrician
who complies with national
regulations and those of the lo-
cal energy supply company, and
who has sucient knowledge
regarding installation locations,
re protection and electrical
installation work.
Replaceable control
gear by a professional
2. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock
from touching product parts carrying hazardous
voltage.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specic hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
3. Package contents
•1 Wall light
•2 Insulation tubes
•Mounting hardware
•Quick-start guide
4. Safety instructions
•This product is intended for private, non-
commercial use only.
•Use the product only for the intended purpose.
•Do not drop the product and do not expose it to
any major shocks.
•Do not operate the product outside the power
limits specied in the technical data.
•Do not modify the product in any way. Doing so
voids the warranty.
•Children must not play with the device. Cleaning
and user maintenance must not be carried out by
children without supervision.
•As with all electrical products, this device should
be kept out of the reach of children.
•Dispose of packaging material immediately
in accordance with the locally applicable
regulations.
•The product must only be operated on a supply
network as described on the type plate.
•Before mounting, check that the wall you have
chosen is suitable for the weight to be mounted.
Also make sure that there are no electric, water,
gas or other lines running through the wall at the
mounting site.
•Electrical cables must never become trapped or
twisted between the product and the surface.
•If the product is attached to a metal surface,
it must be connected to an earth lead or the
installation's potential equalising cable.
GOperating Instructions
5
•Only use the article under moderate climatic
conditions.
•Do not use the product in areas in which
electronic products are not permitted.
•Do not use the product in a damp environment
and avoid splashing water.
•Do not bend or crush the cable.
•Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualied experts.
•Do not continue to operate the device if it is
visibly damaged
•No bare spots must be visible after connection
Warning
•Please note that lights (even LEDs) can gene-
rate heat and may become hot. Always let
the light cool down for a few minutes before
touching it.
•The device can only be operated on a 230
V 50 Hz AC voltage network. Work on the
230 V network must only be carried out by
an electrician certied in your country. The
applicable accident prevention regulations must
be adhered to.
•To avoid an electric shock from the device,
please disconnect the mains voltage (switch off
the automatic circuit breaker). Failure to comply
with the installation instructions can cause res
or other hazards.
Risk of electric shock
Do not open the product and do not operate it if
it is damaged, if smoke, a strange smell or loud
noises are coming from it. Immediately contact
your dealer or our service department (see item
“Service and Support”).
Note
The light source of this light is not replaceable;
when the light source has
reached the end of its life,
you need to replace the
entire light.
Warning
Never look straight into the light source and do
not aim its beam of light straight into the eyes of
other people or animals. This could
damage your/their eyes.
Note
This light contains a light source of energy
eciency class "F".
5. Installation
•Switch off the relevant fuse (fuse box) for the
room in which you wish to install the light.
•Check that the wires are de-energised using a
suitable measuring device (e.g. multimeter).
•Pull the housing upwards and off.
•Loosen the grub screws on the side using the
Allen key provided.
•Never look straight into the light source and do
not aim its beam of light straight into the eyes
of other people or animals. This could damage
your/their eyes.
•Please note that lights (even LEDs) can generate
heat and may become hot. Always let the light
cool down for a few minutes before touching it.
•Pull the wires through the hole (with rubber
insulation) on the mounting plate and attach
the insulation tubes. The tubes must cover the
connecting cable inside the light up to the
terminals. Shorten any connecting wires that
are too long.
•Insulate the cables as specied on the terminals
(10 mm).
•No earth wire can be connected to the lamp, nor
should it be.
•Attach the mounting plate to the wall using the
screws and dowels supplied.
•Connect the wires to the light terminals. Please
ensure that the seal is correctly inserted.
•Place the wall light on the mounting plate and
tighten the grub screws on the side.
•Now push the housing back onto the wall light.
