Znaleziono w kategoriach:
User Guide Anti-mite Vacuum Cleaner
Instrukcja obsługi Odkurzacz antyroztoczowy
Gebrauchsanweisung Staubsauger zum Entfernen von Milben
Mode d'emploi Aspirateur anti-acarien
Manuale d'uso Aspirapolvere Anti-acaro
Instrucciones de uso Aspirador de eliminación de ácaros
Инструкция по эксплуатации Пылесос для удаления клещей
BX7 Pro Max
Please read this instruction carefully before using the product and keep it properly.
Contents
English 2
Polski 10
Deutsch 18
Français 26
Italiano 34
Español 42
Pусский язык 50
2
Product Installation
Parts Name
Packing List
Name Anti-mite Vacuum
Cleaner MIF Filter Mini-brush User Guide
Quantity 1 1 1 1
On/Off button Mode button
Brushroll
Brushroll cover
Graphene heating
plate1
Graphene heating
plate 2
Hor air outlet
UV LED light
Power cord
Mini Brush
LED display
Brushroll cover latch
Microswitch
3
Use of the Product
Insert the plug into the socket and press on/off button,the machine is in Ions +UV+Tapping mode
by default and all indicators light up.
Press the mode button to switch the machine to tapping+ Ions mode.
Press the mode button again to switch the machine to UV+ Ions mode.
Press the mode button again to switch back to the UV+tapping+Ions mode.Press on/off button
again, the machine stop working.(The LED display area has the dust sensor function. When in
clean state, the dust concentration light turns blue. When in dirty state, he dust concentration
light turns red.
As the dust concentration decreases, the dust concentration light slowly changes from red to
blue.)
Note:
1.When the LED display shows brush trapped mode and the icon ash, please clean the lter and brushroll in
time.
2.For safety reasons, the UV light only works when two micro switches are pressed simultaneously.
Otherwise, the UV light will automatically turn off.
3.Do not touch the air outlet and graphene heating plate on the bottom of the machine in case of hand scald.
LED Display
Cleaning and Maintenance
Note:
1.Filters are available at dealers.
2.It is recommended to clean the dust cup after each
use. When the filter is blocked due to excessive dust
accumulation, it needs to be cleaned and replaced if
necessary.
Dust Cup Cleaning
1.Turn off the machine and unplug the power cord. Then press the release button and lift
upward. (Figure 1)
Negative ions mode
Brush trapped Mode
(When the dust is full
or brush trapped, the
icon ashes.) (Indicate dust
concentration change)
UV Mode
Tap Mode
Dust concentration light
1
Release button