Znaleziono w kategoriach:
I www.russellhobbs.com
27410-56
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
2
k
l
i
f
g
j
MAX
e
m
h
A
MAX
h
B
h
C
3
Read the instructions, keep them safe, pass them on if you pass the iron on.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been supervised/instructed and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be done by children
unless they are older than 8 and supervised. Use and store the appliance
out of reach of children under 8 years.
Between uses, the steamer must be rested on a stable, level, heat-resistant
surface.
Don’t leave the appliance unattended while plugged in, or while it’s
resting between uses.
Unplug the appliance before filling, before cleaning, and after use.
Don’t operate the appliance if it’s dropped or damaged, or if it
malfunctions or leaks.
If the cable is damaged, return the appliance in order to avoid a hazard.
¬
The surfaces of the appliance will get hot during use.
i
Do not immerse in any liquid.
• Never use anything except water to fill or clean the appliance.
• Never steam clothing that is being worn.
• Never aim steam directly at people, animals or plants. Steam is hot and can cause serious burns and
scalds if used without care.
• Never hold the steam head downwards while at rest, or tilt it backwards as this may cause hot water
to be discharged and possible injury.
• Ensure the appliance is switched off and cooled down before fitting or removing attachments.
• Don’t use the appliance for any purpose other than those described in these instructions.
HOUSEHOLD USE ONLY
PARTS
1. Ceramic heating plate
2. Steam trigger lock
3. Steam trigger
4. Handle
5. Water tank
6. Power button
7. Delicate fabric attachment
8. Upholstery attachment
BEFORE USING FOR THE FIRST TIME
• Remove labels, stickers and packaging from the appliance.
• Note: Any water droplets or condensation inside the water tank are a result of quality testing prior to
shipping.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
4
IMPORTANT INFORMATION
• The delicate steam setting (v) can be used on delicate fabrics, embellishments and details like beads
and sequins.
• The turbo steam setting (x) can be used on stubborn creases, jeans, upholstery and harder to wash
fabrics.
• For best performance, we recommend using distilled, purified or filtered water in your steamer. Tap
water contains minerals that can build up inside your steamer over time and reduce its efficiency or
even cause damage.
• Never use perfumes, oils or other additives.
• Always check the garment’s care label before steaming, and always test fabrics for colourfastness in
an inconspicuous area. Steamers are not recommended for use on leather, suede, vinyl, plastic, or
other materials that are sensitive to steam.
• During use the steamer and accessories will become HOT. Never try to fit or remove attachments
while still hot.
• After preheating, prime the water pump by holding the steam trigger until steam forms.
• It is normal to feel or hear the water pump inside the device. It may become louder when the water
level in the tank is low. Check and refill the tank when required.
• Small amounts of dripping might occur during use. If excessive, your steamer needs time to get back
up to full temperature. Just allow the steamer a minute to reheat.
• Wearing clothes immediately after ironing or steaming can actually create wrinkles. Always allow the
clothing to cool for about 5 minutes before wearing.
ATTACHMENTS
Delicate fabric attachment
with scent infuser Use on garments labelled j that allow the use of steam.
Tip: For items with printing/embellishment, turn the garment inside out to
avoid damage to sensitive areas.
Upholstery attachment Use to sanitise and refresh bedding, mattresses, curtains, plush toys,
furniture, and hard surfaces (such as worktops or desks that are not heat
sensitive).
Always test for colourfastness and heat sensitivity on an inconspicuous
area.
Fitting/Removing (Fig. A)
1. Make sure that the steamer and attachment are cool.
2. Hook the top of the attachment over the top edge of the steamer. Click the bottom edge into place.
Make sure it is fully fitted and not loose or it may detach itself during use.
3. Remove the attachment using the tab. When removing the attachment, watch out for condensation
that may have built up during use.
FILLING
1. Place the steamer on its base on a stable surface.
2. Pull out the removable water tank (Fig. B)
3. Gently open the rubber cover at the top of the tank.
4. Fill until the water reaches the “MAX” level mark on the side of the tank (Fig. C). Do not overfill. Close
the rubber cover securely.
5. Dry off any excess water from the tank then refit it into the base until it clicks.
• To refill at any time during use, turn the steamer off by pressing the power button until the blue
indicator light goes out, unplug from outlet, and follow the above procedure.
• After refilling, allow to reheat for 45 seconds and then prime the pump by holding the steam trigger
until steam forms.
5
USING
• If the label says “do not iron” or shows this icon i, fit the delicate attachment and make sure to test
on an inconspicuous area prior to steaming the entire garment.
• If the label says “do not steam” or shows this icon m, do not steam the garment.
1. Hang the garment in an area that will not be affected or damaged by the heat and steam, such as on
a shower curtain rail, or in an open doorway.
2. Fit any attachment you wish to use.
3. Plug the steamer in then press the power button. The power button light will slowly flash blue,
indicating that the steamer is heating and on the delicate steam setting.
4. After about 45 seconds the power light will stay on, indicating the steamer is preheated.
5. Prime the water pump by holding steam trigger until steam forms.
6. To generate steam, press the steam trigger. As long as the trigger is held, steam will emit from the
steamer. When the trigger is released, the steam will stop.
• To generate a constant flow of steam without holding the trigger, press the steam trigger and then
slide the steam trigger lock downwards. You can then release pressure on the steam trigger. To turn
the steam off, press the trigger, slide the steam trigger lock upwards, then release the trigger.
7. With your free hand keep the fabric taut. Steam the garment with slow, downward strokes, keeping
the head of the steamer in contact with the fabric.
8. When you have finished, press and hold the power button until the blue light goes out (about 3
seconds) and unplug.
9. Stand the steamer on its base and allow it to completely cool off before storing. To avoid mineral
buildup, empty the tank after each use.
Steam Settings
Your steamer has two steam settings delicate and turbo. The delicate steam setting (v) can be used on
delicate fabrics, embellishments and details like beads and sequins. The turbo steam setting (x) can be
used on stubborn creases, jeans, upholstery and harder to wash fabrics.
• To activate the turbo setting, press the steam trigger twice in quick succession. The power button
will change to green to show that your steamer is in turbo setting.
• To deactivate and return to the delicate steam setting, press the steam trigger twice in quick
succession. The power button will change to blue to show that your steamer is in the delicate steam
setting.
Ceramic heated plate
Your steamer features a ceramic heated plate that helps smooth out wrinkles and creases on the areas of
garments that are more difficult to reach with steam alone. The temperature of the plate is safe for all
ironable fabrics.
To use, hold the plate of the steamer directly against the fabric. Don’t fit any of the attachments. Steam the
garment with slow, downward strokes while keeping the plate in contact with the fabric.
Auto shut off
Your steamer will automatically switch to auto shut-off mode after being left inactive for 15 minutes. The
power button light will flash rapidly to indicate this. To resume steaming, press the steam trigger or power
button and wait for your steamer to fully reheat.
CARE AND MAINTENANCE
1. Make sure steamer is off, unplugged and completely cool.
2. Wipe all surfaces with a clean damp cloth.
3. After the steamer has been thoroughly dried, turn it back on and lightly steam over an old cloth. This
will help remove any residue left in the steam holes.
4. To avoid mineral buildup, empty the tank after each use.
Cleaning attachments
• Delicate fabric attachment: Wash with cold water and small amounts of a gentle cleanser if needed.
The fabric cannot be removed.
• Upholstery attachment: The fabric can be removed and hand washed with cold water and a gentle
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE