Znaleziono w kategoriach:
Kuchnia SMITH&BROWN SFE-SC411-WPY32

Instrukcja obsługi Kuchnia SMITH&BROWN SFE-SC411-WPY32

Powrót
Full size oven operating manual
GB
PL
110000A0655
Instrukcja Obsługi Piekarnika
Pełnowymiarowego
This product has been manufactured as considerate to the environment in modern installations without detrimental to the nature..
GB Our Esteemed Client,
This product has been manufactured in modern installations and presented to your use after a quality control process.
We would like that this product has been bought by you by preferring our firm be provide you best output.
It is kindly requested that operating manual of this product be read prior to use and be kept as reference book in order to make sure
your product's guarantee and be satisfied with provided customer satisfaction offered by our company.
It conforms to EEE regulations. It does not include PCB.
Szanowni Klienci,
T
en produkt został wyprodukowany w nowoczesnych zakładach i przekazany państwu po przejściu
k
ontroli jakości.
C
hcemy aby produkt, który pstwo nabyli służył jak największą wydajnością.
A
by być w pełni zadowolonym z produktu i zagwarantow państwu bezpieczeństwo, prosimy o
z
apoznanie się z instrukcją obsługi przed użyciem produktu i zalecamy zachowanie jej jako źródła
odniesienia.
PL
Ten produkt zost wyprodukowany w przyjaznych dla środowiska nowoczesnych obiektach bez szkody dla natury.
4
10
5
6 - 7
8
11 - 13
9
14 - 17
18
19
20
PAGE
NO REMARK
TABLE OF CONTENTS
Safety information/ Important warnings
Installation and assembly oven
Technical specifications of oven
Replacement of injectors
Wiring in products
Description of oven and control panel
Stove and oven use
Adjustment of electronic meter
Service and cleaning
Button protection board
Environment protection
Eat baking table
21
4
1. SAFETY INFORMATION / IMPORTANT WARNINGS
1- Before operating the oven remove all tapes and packaging material.
2- Operating voltage of the oven is indicated on label information
3- Before operating your oven take all security measures and read this operating manual thoroughly.
4- Fuse current value in electrical installation must not be less than 16A in ovens operating with mono phase and 32 A in ovens operating with tri-phase.
5- Use your oven with earthed plug. Problems arising from improper connection are not included within the scope of warranty of your equipment
6- Keep your oven gas hose and electrical cable away from hot zones, sharp edges and warmed surfaces.
7- When feeding cable is failed, refer to service.
8- While performing gas leakage control, do not use lighter, matches, cigarette fire or similar types of fire.
9- Your oven cannot be used as connected directly to any chimney system for this reason requirements relating to ventilation must be observed in the
operating area of equipment.
10- Use of your oven causes heat and humidity in the room where it is. Ensure ventilation of room completely. Do not cover the ventilation hole at the
burner of product and mount mechanical ventilation equipment (Aspirator). Using oven heavily for a long time may require additional ventilation,
for instance opening window or more efficient ventilation or increase of mechanical ventilation if available. While oven is working, ventilation vents
must not be covered in any way.
11- While the oven is operated, accessible parts may be hot, do not contact with naked hand and it should be kept away from small children.
12- Do not touch glass of oven when the oven is hot.
13- Before operating your oven, keep flammable and combustible materials such as curtain, veil, paper.
14- Do not insert flammable materials such as pressure pot, paper, plastic and fabric in resting room, close to the oven burner or internal cooker part.
15- In the event of going off oven fires, turn off control button of oven and ventilate the environment thoroughly. Do not make any operations with
electrical switches and causing sparks.
16- If leads of power cable are open as per the type of device, insert a switch to disconnect all cable connections between installation and product.
17- Make sure that the oven is placed on the floor balanced. If it is not balanced adjust the height of stays and ensure the balance.
18- The appliance is not intended to be operated by means of an external timer or separate remote-control system.
19- This cooking range must be connected to the supply by a supply cord (3x1 - 1.5mm2 H05-VVF) with the socket-outlet fitted to the final sub-circuit
in the fixed wiring that is intended to supply this cooking range.
20- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
GB
1. Attach the clamp to the hose. Heat one tip of the hose in boiling water and insert it up to the
end of gas inlet and tighten the clamp with screwdriver (See Figure 1)
2. For tightness control pay attention that buttons on the control panel are turned off and tube
is in open Position. Spread little soup made foam at the connection tip of pipe. If there is gas
leakage, there will be foaming at the soup part. Tighten the clamp again carefully
and check it.(See Figure 1)
2. INSTALLATION AND ASSEMBLY OF THE OVEN
FOR PRODUCTS WITH GAS INLET
1. Your equipment is Class 1. It must be mounted and connected in accordance with
current installation regulations.
2. The space between horizontal walls adjacent to the oven must be as follows
(See Figure. 2)
3. Since there is both gas and electricity connection the oven must be placed to a location
Close to both energy sources.
PLACEMENT OF OVEN
FOR PRODUCTS WITH POWER INLET
1. Insert the plug of products to the earthed plug.
2. Get the product connected to the installation by using proper cable via authorized
service for the products without plug.
FIGURE 2
FIGURE 1
Note: If the range is placed on a base, measures have to be taken to prevent the
appliance slipping from the base.
WARNING !!!
- Oven cover must not be covered on the hot and/ or burning ovens.
- Never operate your oven or stove other than its purpose.
- Call the nearest authorized service to make the oven ready for the operation.
- Accessible parts may become hot during use. To avoid burns young children should be kept away.
- Children should be supervised to ensure that they do not play with the appliance.
- Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 40 618 750 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756