Znaleziono w kategoriach:
Witryna chłodnicza przemysłowa WHIRLPOOL ADN 221/1S

Instrukcja obsługi Witryna chłodnicza przemysłowa WHIRLPOOL ADN 221/1S

Wróć
ADN 221S
ADN 221 C
ADN 221/2
ADN 221
Instruction manual
Product Information Sheet
GB
Instructiuni de utilizare
Fisa cu informatii despre produs
RO
Instrukcja obsługi
Karta informacyjna produktu
PL
Návod na obsluhu
Informačný hárok o produkte
SK
Manuale d’istruzione
Scheda informativa sul prodotto
IT
Návod k instalaci a obsłużę
Informační list produktu
CZ
Betriebsanleitung
Produktdatenblatt
DE
Gebruiksaanwijzing
Productinformatieblad
NL
Manual de instrucciones
Hoja de información del producto
ES
Manual de instruções
Folha de informações do produto
PT
Mode d’emploi
Fiche d'information sur le produit
FR
1
2
a
b c
ADN 221 C
3
CAREFULLY READ THE INSTRUCTION MANUAL. If instructions are not followed, there is a
risk of injury, damage of the appliance and loss of the right to free warranty service.
The Manufacturer shall not be held liable for damage arising from the failure to observe
the instructions contained in this manual.
We recommend to keep the Instruction manual the whole time you have the appliance.
When you sell the appliance pass the Instruction manual to the new owner of the
appliance.
General information:
The appliance is a vertical beverage cooler with glass doors and with a fan and is designed
for storage of foodstuffs and for chilling of drinks and for a short-term storage of them.
This appliance is intended for commercial use!
THE MANUFACTURER GUARANTEES RELIABLE OPERATION OF THE REFRIGERATOR
WHEN THE AMBIENT TEMPERATURE IS +16 TO +32 DEGREES CELSIUS AND THE
RELATIVE AIR HUMIDITY NOT GREATER THAN 65 PER CENT.
SAFETY INSTRUCTIONS
General safety requirements:
WARNING: Do not cover the ventilation holes at the top and on the sides of the
appliance.
WARNING: Do not use any mechanical means or electrical devices to hasten the
thawing process when cleaning the freezer compartment.
WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by the
manufacturer.
WARNING: When positioning the appliance, ensure the supply cord is not
trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the appliance.
WARNING: Disposal of the appliance should be according to national rules.
WARNING: risk of fire / flammable materials. Do not damage the
appliance refrigeration system. It contains the refrigerant gas R600a. If
the refrigeration system is damaged:
Do not use any open flame.
Avoid sparks ― do not turn on any electrical appliances or lighting fixtures.
Immediately ventilate the room.
GB
4
Air the room in which the appliance is placed for a few minutes (the size of the
room for a product containing isobuthane / R600a must be at least 4 m3) to avoid
damage to the cooling system.
C-Pentane is used as blowing agent in theinsulation foam and it is a
flammable gas.
This appliance is not designed for the storage of explosive substances such as
aerosol cans with a flammable propellant.
It is prohibited to store petrol and other flammable liquids near the appliance.
The appliance should be used only for storing foodstuffs
Once the appliance is unpacked, make sure that it is complete, that the body
and the electrical cord aren’t damaged. It is forbidden to use a technically
damaged appliance.
The appliance should only be connected to an earthed socket installed in
accordance with the regulations. Make sure that the supply voltage corresponds
with the voltage marked on the rating label. This product complies with all
binding CE labelling directives. The earthed electrical socket by which the
appliance is connected to the mains should be in an accessible place. It is a
legal requirement that the appliance is properly earthed. The manufacturer will
not be held liable for any damage or injury which may result from the failure to
fulfil this requirement.
To avoid the exposure to danger, always have faulty cable be replaced only by
the manufacturer, by our customer service or by qualified person and with a
cable of the same type.
Do not use adapters, multiple sockets and two-wire extension leads. If it is
necessary to use the extension lead, it must be equipped with a protection ring
and a single socket and must have a VDE/GS safety certificate.
The frequency and power of the electricity supply must conform to the general
data parameters of the appliance as it is shown in the product label.
When positioning the appliance, be careful that the electrical cord isn’t
squeezed in order to avoid its damage. Do not store heavy objects such as
cooling devices, furniture or other devices next the appliance in such a way that
they could squeeze and damage the electrical cord. This can cause a short
circuit and a fire.
Make sure that the plug of the electrical cord is not squeezed by the back wall
of the appliance or otherwise damaged. A damaged plug can be the cause of a
fire!

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 41 287 500,00 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756