Znaleziono w kategoriach:
Witryna chłodnicza przemysłowa WHIRLPOOL ADN202/2

Instrukcja obsługi Witryna chłodnicza przemysłowa WHIRLPOOL ADN202/2

Powrót
ADN 202/2
ADN 200/2
ADN 230/2
ADN 203/2
ADN 201/2
Instruction manual
GB
Instructiuni de utilizare
RO
Instrukcja obsługi
PL
Návod na obsluhu
SK
Manuale d’istruzione
IT
Návod k instalaci a obsłużę
CZ
Betriebsanleitung
DE
Gebruiksaanwijzing
NL
Manual de instrucciones
ES
Manual de instruções
PT
Mode d’emploi
FR
1
2
SAFETY INSTRUCTIONS
CAREFULLY READ THE INSTRUCTION MANUAL. If instructions are not
followed, there is a risk of injury, damage of the appliance and loss of the right to
free warranty service.
The Manufacturer shall not be held liable for damage arising from the failure to
observe the instructions contained in this manual.
We recommend to keep the Instruction manual the whole time you have the
appliance. When you sell the appliance pass the Instruction manual to the new
owner of the appliance.
Do not cover the ventilation holes at the top and on the sides of the
appliance.
Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
If the supply cord is damaged it must be replaced by the manufacturer,
manufacturer service agent or a similarly qualified person, in order to avoid a
hazard.
Disposal of the appliance should be according to national rules.
Do not damage the appliance refrigeration system. It contains the refrigerant
gas R600a. If the refrigeration system is damaged:
Do not use any open flame.
Avoid sparks do not turn on any electrical appliances or lighting
fixtures.
Immediately ventilate the room.
Air the room in which the appliance is placed for a few minutes (the
size of the room for a product containing isobuthane / R600a must
be at least 4 m3) to avoid damage to the cooling system.
Once the appliance is unpacked, make sure that it is complete, that the body
and the electrical cord aren’t damaged. It is forbidden to use a technically
damaged appliance.
CONNECTION TO THE MAINS
The appliance should only be connected to an earthed socket installed in
accordance with the regulations. Make sure that the supply voltage
corresponds with the voltage marked on the rating label. This product
GB
3
complies with all binding CE labelling directives. The earthed electrical socket
by which the appliance is connected to the mains should be in an accessible
place. It is a legal requirement that the appliance is properly earthed. The
manufacturer will not be held liable for any damage or injury which may result
from the failure to fulfil this requirement.
To avoid the exposure to danger, always have faulty cable be replaced only
by the manufacturer, by our customer service or by qualified person and with
a cable of the same type.
DO NOT USE extension cords or connectors (adapters), or hubs.
The frequency and power of the electricity supply must conform to the
general data parameters of the appliance as it is shown in the product label.
When positioning the appliance, be careful that the electrical cord isn’t
squeezed in order to avoid its damage. Do not store heavy objects such as
cooling devices, furniture or other devices next the appliance in such a way
that they could squeeze and damage the electrical cord. This can cause a
short circuit and a fire.
Make sure that the plug of the electrical cord is not squeezed by the back
wall of the appliance or otherwise damaged. A damaged plug can be the
cause of a fire!
CAUTION! If the installed interior lighting diode (LED) lamp for the cooling
device is not functioning, contact the maintenance and repair representative
for replacements. LAMPS CAN BE REPLACED ONLY BY THE
MAINTENANCE AND REPAIR REPRESENTATIVE.
If the appliance is unplugged (for cleaning, moving to another place, etc.), IT
MAY BE REPEATEDLY SWITCHED ON AFTER 15 MIN.
The appliance should be used only for storing foodstuffs.
This appliance is not designed for the storage of explosive substances such as
aerosol cans with a flammable propellant.
It is prohibited to store petrol and other flammable liquids near the appliance.
The appliance can’t be disposed of by burning.
Do not place any switched on electrical devices (such as microwave ovens,
hair dryers, irons, electric kettles or other electrical devices) on top of the
appliance because this may cause ignition of plastic parts.
Do not place any dishes with liquids on top of the appliance and do not keep
flowers in vases or other liquid-filled vessels on the appliance.
Do not climb on or sit on the appliance, do not lean on or hang on the
appliance doors and do not allow children to do this.
4
IF THE APPLIANCE IS OUT OF ORDER AND IT IS NOT POSSIBLE TO
REPAIR IT BY MEANS OF GIVEN RECOMMENDATIONS, UNPLUG IT,
OPEN THE DOORS AND CALL THE SERVICE EXPERT. ONLY A
SERVICE REPRESENTATIVE CAN REMEDY ALL TECHNICAL OR
CONSTRUCTION FAULTS.
TRANSPORT
THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY DAMAGE OF THE
APPLIANCE THAT RESULTS FROM NON-COMPLIANCE WITH THE INSTRUCTIONS
FOR TRANSPORTATION.
The appliance should be transported only in the vertical position.
When being transported, the appliance should be protected from atmospheric
conditions (rain, snow, dampness).
The appliance should be firmly secured in place while being transported, to avoid
slippage or any shocks in the transport vehicle.
If the appliance was transported not vertically, it may be connected to the
mains after 4 hours at least. If this is not done, the appliance compressor
may fail.
ENVIRONMENTAL PROTECTION INFORMATION
If the appliance is no longer in use, cut the connecting cable off the used
equipment before its scrapping. Also, remove the appliance lock or render it
useless so that the appliance presents no danger to children while being stored for
di- sposal. This appliance is marked with a symbol of the crossed out waste
container in conformance with the European Directive 2002/96/EC. Such marking
informs that the equipment may not be kept together with other waste coming from the
household after the period of its use. The user is obliged to dispose of the appliance at the
waste collection point. The local waste collection points, shops and communal units form an
appropriate system enabling the disposal of the equipment.
Handling the used electrical and electronic equipment properly contributes to the avoidance
of consequences harmful to the human health and natural environment, resulting from the
presence of hazardous substances and improper storage and processing of such equipment.
GENERAL INFORMATION
The appliance is a vertical display cooler with glass doors and with a fan and is designed
for storage of foodstuffs and for chilling of drinks and for a short-term storage of them.
This appliance is intended for commercial use!
THE APPLIANCE IS ECOLOGICALLY CLEAN, CONTAINING NO MATERIALS HARMFUL TO
THE OZONE LAYER: the refrigerant used is R600a, the foaming agent used for the
appliance insulation is cyclopentane C5H10.
THE MANUFACTURER GUARANTEES RELIABLE OPERATION OF THE REFRIGERATOR
WHEN THE AMBIENT TEMPERATURE IS +16 TO +32 DEGREES CELSIUS AND THE
RELATIVE AIR HUMIDITY NOT GREATER THAN 60 PER CENT.
The appliance climate class is 3. Product temperature class S.

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 40 618 750 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756