Znaleziono w kategoriach:
2101209000_31-P5607_00_01_WEB 80 × 120 mm
www.emos.eu
P5607
GB Thermostat
CZ Termostat
SK Termostat
PL Termostat
HU Termosztát
SI Termostat
RS|HR|BA|ME Termostat
DE Thermostat
UA Термостат
RO|MD Termostat
LT Termostatas
LV Termostats
EE Termostaat
BG Термостат
FR Thermostat
IT Termostato
ES Termostato
NL Thermostaat
2
1
2
1
2
3
4
5
1011
7
8
9
6
1
4
2
3
3
3
4
4
GB | Thermostat
The P5607 thermostat is designed for controlling heating and air-condi-
tioning systems.
Important
• Before the rst use, make sure to carefully read the operating manual
for the thermostat, as well as the manual for the boiler or air-condi-
tioning equipment.
• Turn o power before installing the thermostat!
• Installation should be carried out by a qualied professional!
• Abide by prescribed standards during installation.
Technical specications:
Switched load: max. 230 V AC; 8 A for resistive load; 2 A for inductive
load
Temperature measurement: 0°C to 40°C with 0.1°C resolution; accuracy
±1°C at 20°C
Temperature setting: 5°C to 35°C in 0.5°C increments
Dierential setting: 0.2°C to 2°C, in 0.1°C increments
Power supply: 2× 1.5 V AAA batteries (LR03)
Accessories: 2 screws, 2 wall plugs
Dimensions and weight: 26 × 120 × 78 mm; 126 g
Description of Control Elements (g. 1)
1 – select and edit programme
2 – adjust value
3 – thermostat settings
4 – time and date settings
Screen Description (g. 2)
1 – batteries low
2 – operating mode
3 – selected programme
4 – time
5 – days
6 – set temperature
7 – cooling mode
8 – heating mode
9 – room temperature
10 – HOLD mode
11 – manual mode
INSTALLATION
Attention:
Before changing the thermostat, disconnect the heating/air-conditioning
system from the main power in your at. This will prevent potential injury
by electric current.
Thermostat Placement
Thermostat placement signicantly aects its functioning. Place it in a
room where members of the family spend most of their time. Choose a
spot preferably on an inside wall where air circulates freely and there is no
5
direct sunlight. Do not place the thermostat in the vicinity of heat sources
(such as TV sets, radiators, fridges), or close to a door (due to frequent
shocks or vibrations). If you do not comply with these recommendations,
the thermostat will not maintain room temperature correctly.
Thermostat Installation
1. Remove the rear cover of the thermostat.
2. Mark positions for holes.
3. Drill two holes, carefully insert the plastic wall plugs into them and
use two screws to fasten the rear thermostat cover.
4. Connect the wires to the labelled terminals according to the wiring
diagram.
5. Complete the installation by tting the thermostat onto the mounted
rear cover.
Note: The terminals are located underneath the cover. Gently press onto
the right side of the cover and turn it to the left.
Wiring Diagram
NO – normally open contact
COM – contact for the switch
NC – normally closed contact
Voltage connection diagram for connecting thermostat P5607 to a
boiler with „NO“ outlet:
Max. 230 V 8(2) A 230 V~N
NL
L
NO NCCOM
Heating device requiring
230 V power supply, e.g.
central heating pump.
Thermostat
* When connecting a cooling device to the thermostat, connect the „L“
phase conductor to the „NC“ terminal.