Znaleziono w kategoriach:
Ekspresy ciśnieniowe (14)
Wróć
I www.russellhobbs.com
28670-56
2
n
o
m
l
f
k
g
e
j
i
s
r
3
EN
Before First Use
KRead the instructions and retain for
future reference
Remove labels, stickers and
packaging from the iron and
Soleplate
Iron a test piece of cotton fabric to
clean the Soleplate
Note - The presence of water droplets or
condensation inside the tank is normal and
results from factory testing to ensure product
quality.
Intended Use
rHousehold use only
KDo not use outdoors
Important Safeguards
When using an electrical appliance, basic
safety precautions should always be followed
to reduce the risk of fire, electric shock, and/or
injury, including the following:
• Do not use the appliance for any purpose
other than those described in these
instructions.
• Do not operate the appliance if it’s
damaged or malfunctions.
• Do not use accessories or attachments
other than those we supply.
• Do not leave the appliance unattended
while plugged in, or while it’s standing
on the ironing board.
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been supervised/
instructed and understand the hazards
involved.
• Children shall not play with the appliance.
Cleaning and user maintenance shall not
be done by children unless they are older
than 8 and supervised. Use and store the
appliance out of reach of children under
8 years.
• Keep the iron and its cord out of reach of
children less than 8 years of age when it
is energized or cooling down.
• Use the iron, or set it on its heel, on a
stable, level, heat-resistant surface,
preferably an ironing board.
• Unplug the iron before filling, before
cleaning, and after use.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent
• The appliance has a protective thermal
fuse, which will blow if it overheats. If this
happens, the appliance will stop working,
and must be returned for repair.
• The iron must not be stored until it has
cooled.
• The appliance is not to be used if it has
been dropped, if there are visible signs of
damage or if it is leaking.
Warning Symbol Glossary
i
Do not Immerse in water
hUse Caution. Hot Surfaces
BDo not use this appliance near
bathtubs, showers, basins or other
vessels containing water
4
Parts List
1Spray nozzle
2Reservoir Cover
3Steam on/off slider
4Spray button
5Temperature Select Button
6Steam button
7Temperature indicator light
8Handle
9Heel
10 Reservoir
11 Self Clean Button
12 Soleplate h
Temperature Setting Guide
The appliance has 3 SimplySet™ heat settings.
By default the iron will be on the low setting
when switching on.
Refer to fabric care symbols on your garment.
Symbol Description Setting
jnylon, acrylics,
polyester LO
kwool, polyester
mixtures MED
lcotton, linen HI
If the instructions on the fabric label differ
from this guide, follow the instructions on
the label.
Filling
You may use the iron with tap-water, but if
you live in a hard water area, you should use
distilled water (not chemically descaled or
softened water).
• Ensure the appliance is switched off and
unplugged from the mains.
• Hold the appliance with the front raised.
• Open the Reservior Cover.
• Pour slowly, to let the air in the reservoir
escape.
• Do not fill past the max marking or water.
• Wipe up any spillage.
Use - Switching on & Setting
Temperature
• Stand appliance on its heel.
• Plug into the mains and switch on.
Parts
List Symbol/
Button Action
5Temperature
Select Button Press to cycle
to heat option
Once light stops ashing the appliance is at
set temperature and ready to use.
Steam Symbol Glossary
Parts
List Symbol/
Button Description
3SNo Steam
3hMax Steam
5
Use - Steam Ironing
This is a three step operation:
Parts
List Symbol/
Button Action
5Temperature
Select Button Press to cycle
to HI
3hSlide Switch
to position
6Steam Button Press
Use - Vertical Steaming
Remove wrinkles from hanging clothes,
hanging curtains, and furnishing fabrics.
Ensure adequate ventilation behind the fabric,
otherwise moisture may build up, causing
mildew. Check that pockets, turn-ups, and
cuffs are empty.
• Hold the iron close to (but not touching)
the fabric.
• Allow 4 seconds between Steam bursts,
to maintain temperature.
This is a three step operation:
Parts
List Symbol/
Button Action
5Temperature
Select Button Press to cycle
to HI
3SSlide Switch
to position
6Steam Button Press
Use - Spray
Water spotting affects some fabrics. Test this
out on a hidden part of the fabric.
• Lift the iron off the fabric.
• Aim the spray nozzle at the fabric.
Parts
List Symbol/
Button Action
4Spray button Press
Use - Dry Ironing
If dry ironing for more than 20 minutes,
empty the reservoir to avoid spontaneous
bursts of steam.
Parts
List Symbol/
Button Action
3SSlide Switch
to position
After Use
• Unplug the iron.
• Open the Reservoir Cover.
• Hold the appliance over a sink, turn it
upside down and drain the water from
the Reservoir.
• Stand the appliance on its heel and
leave it to cool down completely.
• When cooled, wipe off any moisture and
close the Reservoir Cover.
• Wipe outer surfaces with a damp cloth.
• Remove spots from the Soleplate with a
little vinegar – take care not to scratch it.
• Store the appliance on its heel, to avoid
corrosion and damage to the Soleplate.