Znaleziono w kategoriach:
Instrukcja obsługi Urządzenie wielofunkcyjne HP Envy 7220E Druk w kolorze, Automatyczny druk dwustronny, Wi-Fi, Instant Ink
Reference Guide
HP ENVY Inspire
7200e series
Справочно ръководство
Referentni priručnik
Referenční příručka
Οδηγός αναφοράς
Felhasználói kézikönyv
Podręczny przewodnik
Ghid de referinţă
Referenčná príručka
Referenčni priročnik
Referenzhandbuch 2
2
English
Control Panel
Dashboard
Open the Dashboard by touching or
swiping at the top of the display to
access printer tasks and status.
Back
Home
Help
Setup
Wireless
Quiet mode
Wi-Fi Direct
Ink Status
HP EcoSolutions
Printer Features
1Scanner lid
2Output tray
3Photo tray (4x6, 5x5, 5x7 inches)
4Main tray (Letter/A4, 4x12 inches photo)
5Power light and Wi-Fi light
6Power button
Do not use USB for setup
Printers with a label covering the USB port must be set up with HP Smart and an Internet
connection. After setup, you can print using a USB cable if needed, but the printer must
also remain connected to the Internet.
3
4
1
6
5
2
3
English
During Setup
Potential Issue Solution
Printer Wi-Fi setup mode timed out
(Wi-Fi light not blinking)
If the HP Software is unable to nd your printer, the
printer might have exited setup mode.
Check the control panel and select “Resume Setup”, if
prompted.
Computer or mobile device too
far from printer
Move your computer or mobile device closer to the
printer. Your device might be out of range of the
printer’s Wi-Fi signal.
Computer connected to a Virtual Private
Network (VPN) or remote work network
Disconnect from a VPN before installing HP Smart
software. You can’t install apps from the Microsoft
Store when connected to a VPN.
Connect to the VPN again aftwer nishing printer setup.
Note: Consider your location and the security of the
Wi-Fi network before disconnecting from a VPN.
Wi-Fi turned o on computer
(computer connected by Ethernet)
If your computer is connected by Ethernet, turn on
the computer’s Wi-Fi while setting up the printer.
Disconnect the Ethernet cable temporarily to complete
setup over Wi-Fi.
Bluetooth is turned o on your computer
or mobile device
Location is turned o on your mobile
device
Turn on Bluetooth for the computer or mobile device being
used to complete printer setup. For mobile devices, turn
on Location services also. Bluetooth and Location help the
software nd your network and printer.
Note: Your location is not being determined and no
location information is being sent to HP as part of
the setup process.
Help and tips for Wi-Fi and connectivity
If the software is unable to nd your printer during setup or post setup, check the following conditions to
resolve the issue.
Printer updates
Automatic rmware updates are turned on for this printer. To change this setting, see the online
product user guide at hp.com/support. View the HP Privacy Policy and information on data collection
at hp.com/privacy
English
4
Printer hardware setup information
Follow instructions in the HP Smart software for easy setup. Visit 123.hp.com to install
software.
Install cartridges
1. Make sure the scan lid is closed. Open the front door and then lift the cartridge access door (as shown).
Post Setup
Potential Issue Solution
Printer won't reconnect or maintain a
connection to a netwwork after setup
1. Swipe down on the printer control panel to open the
Dashboard.
2. Touch > Network Setup > Restore Network
Settings. Touch Yes when prompted. The Wi-Fi light
will blink blue.
3. Close and reopen HP Smart on your computer or
mobile device.
4. In HP Smart, right-click or press and hold the printer
card to remove the printer from the Home screen. Then,
add the printer again and follow the on-screen prompts.
3. Rotate the cartridges so the taller end faces
towards the printer. Insert the cartridges and
click into place.
2. Remove the protective tape on both
cartridges. Do not touch the contacts under
the tape.
4. Close the carriage access door and front door
when nished.
English
5
Load Letter or A4 paper
2. Push in the photo tray to access
the main tray.
4. Close the main tray. Pull out the
output tray extender.
3. Slide out the paper guides.
Load Letter or A4 paper.
Push paper all the way into the
tray and adjust the guides.
1. Open the main tray.
The information contained herein is subject to change without notice.
Help and Support
For printer troubleshooting and videos, visit
the HP support site. Enter your model name to
nd the printer. hp.com/support