Znaleziono w kategoriach:
Radioodtwarzacze (7)
Wróć
DAB+ All-in-one Audio System
RD-E861B-DAB
INSTRUCTION MANUAL
NÁVOD K POUŽITÍ
INSTRUKCJA OBSŁUGI
NÁVOD NA POUŽITIE
HASZNÁLATI UTASÍTÁS
MANUAL DE INSTRUCȚIUNI
РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ
EN
CZ
PL
SK
HU
RO
BG
EN
INTRODUCTION
• Thank you for buying our product.
• Please read through these operating instructions, so you will know how to operate your
equipment properly. After you finished reading the instructions manual, put it away in a safe
place for future reference.
DANGER
Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
This Product is classied as a Class 1 LASER PRODUCT.
THE CLASS 1 LASER PRODUCT label is located on the rear exterior.
SAFETY
General
• Do not drop the device and do not expose it to liquid, moisture or humidity. These might lead
to damage to the device.
• If the device is moved from a cold environment into a warmer one, do let it adapt to the new
temperature before operate the device. Otherwise, it might lead to condensation and cause
malfunctions in the device.
• Do not use the device in the dust environment as dust can damage the interior electronic
components and lead to malfunctions in the device.
• Protect the device from strong vibrations and place it on stable surfaces.
• Do not attempt to disassembly the device.
• If the device is not using for a long period of time, disconnect it from the power supply by
unplugging the power plug. This is to avoid the risk of fire.
• The ventilation should not be impeded by covering the ventilation openings with items, such
as newspapers, table-cloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
Battery handling and usage
• Only adults should handle battery. Do not allow a child to use this apparatus unless the
battery cover is securely attached.
• Remove batteries if exhausted or if they will not be used again for a long period. The
incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or
cause the batteries to burst, therefore:
- Do not mix battery types, e.g. alkaline with zinc carbonate.
- When inserting new batteries, replace all batteries at the same time.
• Batteries contain chemical substances, so they should be disposed of properly.
EN
PRODUCT OVERVIEW AND CONTROL BUTTONS
1. Remote Control Sensor
2. button
3. Disk tray
4. Display
5. VOLUME control
6. USB port
7. AUDIO IN socket
8. MODE button
9. SCAN/ / button
10. SELECT/ button
11. TUNING/SKIP button
12. TUNING/SKIP button
13. MENU button
14. button
15. Mains Cable
16. DAB/FM antenna
NOTE: The USB port does not support charging external devices.
EN
REMOTE CONTROL BUTTONS
Power On/O
Open / Close disc tray
Clock settings
Sleep timer
Daily timer
DAB: Full scan
FM: Search for the next / previous station
CD/USB: Intro playback
CD/USB: Random playback
CD/USB: Repeat playback
Mode selection (DAB, FM, CD, USB, AUX and Bluetooth)
DAB/FM: Display information about the station you are listening to.
CD/USB: Display ID3 information.
Conrm selection
CD/USB/Bluetooth: Start / Pause playback
CD/USB: Stop playback
CD/USB/Bluetooth: Previous track
FM: Manual search
CD/USB/Bluetooth: Next track
FM: Manual search
Select equalizer preset
DAB/FM: Preset station
CD/USB: Programmed playback
Increase / Decrease volume
Enter / Exit the menu
CD/USB: Next / Previous folder
FM: Stereo / Mono mode
Mute / unmute
EN
To install the batteries
Lift o the battery compartment cover from the rear of the remote control. Insert 2 x 1,5V AAA
size batteries in accordance with the diagram in the battery compartment. Take care to observe
the correct polarity.
Remote control operation
To operate the unit with the remote control, point the remote handset at the remote sensor on
the front panel and press the appropriate button on the remote handset. The remote works
best within a range of 4 meters from the front panel and on an angle of 60 degrees. Bright
sunlight or room light conditions can interfere with the remote control. If the remote operation is
unsatisfactory or stops working entirely, rst try replacing the remote batteries, then try reducing
the room lighting conditions.
GETTING STARTED
MAINS POWER
NOTE: Connecting the unit to any other power source may cause damage the unit.
Unwind the mains cable to its full length. Connect the mains cable at the rear of the main unit to
the mains socket. The unit is now connected and ready to use.
WARNING: Make sure the unit is not resting on top of the mains cable, as the weight of the unit may
damage the mains cable and create a safety hazard. If the mains cable is damaged it must be replaced
by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
BASIC OPERATION
Powering ON/OFF
• Press STANDBY to switch on the unit.
• Press STANDBY again to switch the unit back to Standby mode.
• Disconnect the power cable of the mains adapter from the mains socket if you want to switch
the unit off completely.
NOTE: When the unit is idle for approximately 15 minutes, it will automatically switch to Standby mode.
Mode selection
Press MODE repeatedly to switch between DAB, FM, CD, USB, AUX and Bluetooth modes.
Language
• In DAB or FM mode, press MENU to enter the menu.
• Press / to select <Jazyk> and then press SELECT/ to confirm.
• Press / to select the desired language and then press SELECT/ to confirm selection.
NOTE: The default language is Czech. Available languages are English and Polish.
Volume
Rotate the VOLUME knob to adjust the volume.
NOTE: If you wish to turn the sound off, press MUTE on the remote control. Press MUTE again or press
VOLUME +/– on the remote control or turn the VOLUME control on the unit to resume normal listening.
Sleep timer
• To set the sleep timer press SLEEP on the remote control repeatedly to adjust the sleep
timer (OFF, 10, 20, 30, 40, 50, 60, 70, 80, 90 minutes).
• To show the remaining time before the unit turns off automatically press SLEEP.
• To cancel the sleep timer, press SLEEP repeatedly to select <Sleep OFF>.