Znaleziono w kategoriach:
Laminatory (7)
Wróć
OPUS AutoLAM A3 • User guide EN
OPUS AutoLAM A3
User guide
EN
1 HEALTH & SAFETY PRECAUTIONS
• Before operating the equipment please read the Health & Safety precautions,
manufacturer recommendations and the operating manual.
• The equipment must be operated according to general Health & Safety rules.
• The operating manual should be easily available at any time for the operator.
• The equipment: should be installed on a sturdy level surface near a mains socket.
• = should be protected against dust and moisture.
• = must not be placed near a heating or ventilation units.
• = must not be used in vicinity of inflammable liquids or
gases.
• = power cable should be protected against damage and
not be used to move the equipment or pull the plug
from the socket.
• = must be kept away and out of the reach of children and
animals.
• = must not be used for any other purposes than those indi
cated in the instruction manual.
• = must not be located outside and operated in room tem
peratures lower 8 °C.
• Danger! The equipment contains rotary elements. Ensure long hair, loose jewel-
lery, ties and other loose clothing are keep away they can be get entangled in
the rolls.
• It is necessary to check and supervise if the equipment is operated correctly.
• In case of any malfunctions, you must contact the dealer or service team.
• Before removing any covers from the equipment, remove the power plug from
a mains socket.
• Using inappropriate lubricants causes a fire hazard.
• Any repairs must be carried out only by authorized sta during the guarantee
period.
• Do not leave the equipment unattended while in operation.
• After operating wait for the cooling down procedure has finished, turn o the
equipment by power switch on the unit. Then remove the power plug from a
socket.
2
2 MANUFACTURER’S RECOMMENDATIONS
• Use only recommended supplies and accessories.
• Do not put documents thicker than 0.6 mm into the laminator.
• Remove the power plug from the socket before moving the equipment or when not in use
for long periods.
• If the equipment is switched on and not operated for long periods, it can become over-
heated.
• To avoid bad quality lamination put 2 or 3 sheet of A4 paper through in order to cool the
rollers down.
OPUS AutoLAM A3 • User guide EN
3 UNIT DECRIPTION
1. Auto/Manual Mode Button.
2. Pouch Selection Button.
3. Auto mode Indicator.
4. Exit Tray.
5. Cold Lamination Indicator.
6. Pouch Indicator, 75 – 250 μm/micron.
7. Reverse Button.
8. On/O Switch.
9. Pouch /Document Entry Slot.
3
• Always insert the laminating pouch, with the close end first.
• Putting the open end first can cause bubbling and the films to be stuck or rapped round
the rollers inside.
• Should a document get stuck inside the laminator use the reverse function (REV) switch
to eject the document.
• Tailor cut pouches can make the rollers sticky, dirty and rapped round them, use a carrier.
• Remove all metal elements (staples & paper clips, etc.) before laminating the documents.
• WARNING! The equipment contains heating elements, be aware high temperatures!
• Use a laminating pouch recommended for the size of the document.
• Insert the document into the centre of the pouch and the laminating slot.
• Do not laminate pouches without a document inside.
• Laminated documents should be cut after they have cool down.
• Self-adhesive pouch should only be laminated in the cold mode.
• Temperature sensitive documents should not be laminated in hot the lamination mode.
• Before laminating important document make a test on a similar document.
• NOTE! Not compliance with the rules and recommendations above can void the Gua-
rantee/Warranty.
VS100AF
A
D I
H
E
G
F
B
C
A. On/Off Switch
B. Auto/Manual Mode Button
C. Pouch Selection Button
D. Auto mode Indicator
E. Cold Lamination Indicator
F. Pouch Indicator (75mic-250mic)
G. Reverse Button
H. Pouch /Document Entry Slot
I. Exit Tray
LAMINATOR CONTROLS
8
1
2
3
5
6
7
4
9
4 QUICK START GUIDE IN AUTO MODE
4
20”
QUICK START GUIDE-AUTO MODE
1 2
3 4
5
7
6
50 cm
OPUS AutoLAM A3 • User guide EN
5 QUICK START GUIDE IN MANUAL MODE
5
VS100AF
20”
QUICK START GUIDE-MANUAL MODE
1 2
3 4
5
7
6
50 cm