Znaleziono w kategoriach:
Generatory pary (16)
Wróć
© 2018 Koninklijke Philips N.V.
All rights reserved
4239 001 1353 1
GC8900 series
User Manual
Ръководство за потребителя
Uživatelská příručka
Εγχειρίδιο χρήσης
Kasutusjuhend
Korisnički priručnik
Felhasználói kézikönyv
Naudotojo vadovas
Lietotāja rokasgrāmata
Podręcznik użytkownika
Manual de utilizare
Používateľská príručka
Uporabniški priročnik
Korisnički priručnik
Посібник користувача
2 hrs.
1
2
1
2
2
6
10
14
18
22
3
7
11
15
19
23
4
8
12
16
20
24
5
9
13
17
21
25
3
5 6 7
910
11
8
1 2
4
13
15
1214
1
6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet from the support that
Philips oers, register your product at www.philips.com/welcome.
Read this user manual, the important information leaet, and the quick start guide carefully before
you use the appliance. Save them for future reference.
Product overview
1 Steam supply hose
2 Steam trigger/Steam boost
3 ‘Iron ready’ light
4 Soleplate
5 Iron platform
6 Carry lock release button
7 Detachable water tank
8 Filling hole
9 Supply hose storage compartment
10 EASY DECALC knob
11 Mains cord with plug
12 EASY DECALC light
13 ECO button with light
14 ‘Water tank empty’ light
15 On/o button with power-on light and auto-o light
Preparing for use
Type of water to use
This appliance has been designed to be used with tap water. However, if you live in an area with hard
water, fast scale build-up may occur. Therefore, it is recommended to use distilled or demineralized
water (50% demineralized/distilled water mixed with water could be used as well) to prolong the
lifetime of the appliance.
Warning: Do not use perfumed water, water from the tumble dryer, vinegar, starch,
descaling agents, ironing aids, chemically descaled water or other chemicals, as they
may cause water spitting, brown staining or damage to your appliance.
Filling the water tank
Fill the water tank before every use or when the ‘water tank empty’ light ashes. You can rell the
water tank at any time during use.
1 Remove the water tank from the appliance (Fig. 2) and ll it with water up to the MAX indication
(Fig. 3).
2 Put the water tank back into the appliance by tting the bottom part into the appliance rst.
3 Push in the top part of the water tank until it locks into place (‘click’) (Fig. 4).
Water tank empty light
When the water tank is almost empty, the ‘water tank empty’ light ashes (Fig. 5). Fill the water tank
and press the steam trigger to let the appliance heat up again. When the ‘iron ready’ light lights up
continuously, you can continue steam ironing.
English
7
Using the appliance
OptimalTEMP technology
Warning: Do not iron non-ironable fabrics.
The OptimalTEMP technology enables you to iron all types of ironable fabrics, in any order, without
adjusting the iron temperature and without sorting your garments.
It is safe to just rest the hot soleplate directly on the ironing board (Fig. 6) without putting back to the
iron platform. This will help reduce the stress on your wrist.
-Fabrics with these symbols (Fig. 7) are ironable, for example linen, cotton, polyester, silk, wool,
viscose and rayon.
-Fabrics with this symbol (Fig. 8) are not ironable. These fabrics include synthetic fabrics such
as Spandex or elastane, Spandex-mixed fabrics and polyolens (e.g. polypropylene). Prints on
garments are not ironable either.
Ironing
1 Place the steam generator on a stable and even surface.
Note: In order to ensure safe ironing we recommend to always place the base on a stable ironing
board.
2 Make sure that there is enough water in the water tank (see ‘Filling the water tank’).
3 Put the mains plug in an earthed wall socket and press the on/o button to switch on the
steam generator. Wait until the ‘iron ready’ light lights up continuously (Fig. 9). This takes approx.
2 minutes.
4 Remove the steam supply hose from the steam supply compartment.
5 Press the carry lock release button to unlock the iron from the iron platform (Fig. 10).
6 Press and hold the steam trigger to start ironing (Fig. 11).
Note: For rst use, press and hold the steam trigger continuously for up to 30 seconds for steam. It
can take a longer time if the iron is stored for a long time.
7 For best ironing results, after ironing with steam, perform the last strokes without steam.
MAX setting
For faster ironing and a higher amount of steam, you can use MAX setting.
1 Press and hold the on/o button for 5 seconds until the light turns white.
2 The appliance returns to normal steam mode automatically after 15 minutes to save energy.
3 Otherwise, to switch back to normal steam mode at any time, press and hold the on/o button for
2 seconds until the light turns blue again.
Steam boost function
The steam boost function is designed to help tackle dicult creases.
-Press the steam trigger twice quickly to activate the steam boost function. The appliance releases
3 powerful shots of steam.
-To stop the steam boost function, press the steam trigger once.
English