Znaleziono w kategoriach:
Prostownica REMINGTON S8598 Keratin Protect

Instrukcja obsługi Prostownica REMINGTON S8598 Keratin Protect

Keratin Protect Intelligent
Thank you for buying your new Remington® product. Please read these
instructions carefully and keep them safe.
Remove all packaging before use.
1 This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been supervised/instructed and
understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be done by children unless they are
older than 8 and supervised. Keep the appliance and cable out of reach of
children under 8 years.
2 Warning - for additional protection the installation of a residual current
device (RCD) with a rated residual operating current not exceeding 30mA is
advisable in the electrical circuit supplying the bathroom. Ask an electrician
for advice*.
3 For UK household use only. Currently, the fitting in a bathroom of an
electrical socket suitable or capable of operating the dryer/straightener is not
permitted (see BS7671).
4 Always ensure the voltage to be used corresponds to the voltage stated on
the unit before plugging the appliance into the mains socket.
5 Warning: Do not use this appliance near bathtubs, showers or basins
or other vessels containing water.
6 When the appliance is used in a bathroom, unplug it after use since
the proximity of water presents a hazard even when the hairdryer is switched
7 Do not wrap the cord around the unit. Check the cord regularly for any sign
of damage.
8 If the supply cord of this unit becomes damaged, discontinue use
immediately and return the appliance to your nearest authorised
Remington® service dealer for repair or replacement in order to avoid a
9 Do not use the appliance if it is damaged or malfunctions.
10 Do not allow any part of the appliance to touch the face, neck or scalp.
11 Do not leave the appliance unattended while plugged in.
12 Only set the appliance down on a heat-proof surface.
13 Do not place the appliance down on any soft furnishings.
14 This appliance is not intended for commercial or salon use.
15 Let the appliance cool down before cleaning and storing away.
16 WARNING: Contains traces of nuts.
1 Advanced Keratin and Almond oil ceramic coated 110mm plates
2 On/Off switch
3 Intelligent heat protection sensor
4 Intelligent heat protection sensor On/Off switch
5 Intelligent heat protection sensor On indicator icon
6 Temperature controls
7 Temperature display
8 Temperature boost function
9 Temperature lock function
10 Hinge lock
11 Heat resistant pouch (not shown)
12 3m swivel cord
Advanced ceramic coated plates infused with Keratin and Almond Oil for
smooth, shiny, healthy looking hair.
Intelligent heat protection sensor constantly measures the moisture level in
your hair and automatically adjusts the temperature of the plates to prevent
excessive heat while styling.
High heat 160°C to 23C.
110mm longer length floating plates – for even pressure on the hair as you
6, 8, 9
Fast heat up - ready in 15 seconds.
Adjustable +/- temperature controls, provides precise heat control to suit hair
type and length.
Switch lock function - prevents accidentally changing the temperature
settings while using the styler.
Turbo boost function – automatically sets the highest temperature. Hold the
+’ button for 2 seconds and the temperature will boost to 230°C.
Please note, the highest temperature is not suitable for every hair type.
Please select a temperature mode depending on your hair texture.
Temperature lock function - prevents accidentally changing the temperature
settings while using the styler.
Automatic safety shut off – this unit will switch itself off if no button is
pressed or it is left on after 60 minutes
Multivoltage: for home or abroad. At 120V times and temperatures may vary.
Before use, ensure the hair is clean, dry and tangle-free.
Section the hair prior to styling.
Style the lower layers first.
Plug the styler into the mains power supply.
When the straightener is plugged in but not turned on the lock symbol B
will be illuminated indicating the styler is in standby mode.
Press and hold the on button to switch on.
The Heat Protection sensor will automatically be on when the styler is
turned on – indicated by the illuminated sensor indicator icon .
To turn this function off press and hold the Heat Protection Sensor On/Off
Start styling on lower temperatures first. Select the appropriate
temperature for your hair type by adjusting the +/- temperature controls on
the side of the product.
+’ Increases the temperature ‘- ‘decreases the temperature.
, Recommended Temperatures:
Temperature Hair type
160°C - 180°C Thin / fine, damaged or
bleached hair
180°C - 200°C Normal, healthy hair
200°C - 230°C Thick and difficult to
style hair
The temperature display will flash until the desired temperature is reached
- this will be about 15 seconds.
Working on one section at a time run the straightener through the entire
length of the hair, without stopping.
If the Intelligent Heat Protection Sensor is on during styling, the indicator
icon will pulse indicating the sensor is monitoring moisture in the hair and
continually optimising the temperature of the plates to prevent damage.
These temperature changes are not displayed on the straightener but
happen quickly automatically during styling.
, Temperature lock function
Set the desired temperature by pressing +/- buttons and lock the switch
settings by pressing the ‘-‘ button for 2 seconds. A ‘padlock’ symbol will
appear on the temperature display.
To unlock the switch settings, press and hold the ‘-‘ button again for 2
, Temperature boost function
For quick touch ups of stubborn, hard to style sections.
The temperature boost function boosts the temperature to 230°.
Hold the ‘+’ button for 2 seconds to operate.
, Caution: the highest temperature is not suitable for every hair type. If you
plan to use this straightener on the boost setting of 230°C please test on a
small section of your hair first.
, Hinge Lock for Storage
Plates can be shut together for easy storage.
Locked - Push the hinge lock up to the locked position.
Unlocked - Pull the hinge lock down to the unlocked position.
, NOTE: Do not heat the unit in the locked position.

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 39 875 000 zł; NIP 767-10-04-218, REGON 570217011; Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756