-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
HC7130
HC7151
I www.remington-europe.com
ProPower Hair Clipper
2
e
fi
k
m
j
3
Thank you for buying your new Remington® product. Please read these instructions
carefully and keep them safe. Remove all packaging before use.
IMPORTANT SAFEGUARDS
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been supervised/instructed and
understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be done by children unless they are
older than 8 and supervised. Keep the appliance and cable out of reach of
children under 8 years.
B
Do not use this appliance near bathtubs, showers, basins or other vessels
containing water.
• Do not use the product with a damaged cord. A replacement can be obtained
via our International Service Centres.
• This product should only be used with the charging adaptor supplied.
• WARNING: Keep the appliance dry.
• The adaptor contains a transformer. Do not cut o the adaptor to replace it with
another plug, as this causes a hazardous situation.
• Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by Remington.
• Do not use this product if it is not working correctly, if it has been dropped or
damaged, or dropped in water.
• This appliance should never be left unattended when plugged into a power outlet,
except when charging.
• Keep the power plug and cord away from heated surfaces.
• Do not plug or unplug the appliance with wet hands.
• Do not twist or kink the cable, or wrap it round the appliance.
• This appliance is not intended for commercial or salon use.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
N
O
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
4
PARTS
1. On/O/Turbo switch
2. Blade set
3. 2 attachment guide combs 1 – 21mm
and 24 – 42mm, 3mm (not shown)
4. Blade release button
5. Charging indicator light
6. Micro USB port
7. Adaptor (not shown)
8. Slide select adjustable comb switch
GETTING STARTED
CHARGING YOUR APPLIANCE
• Before using your hairclipper for the rst time, charge for 14-16 hours (HC7130) and 2
hours (HC7151).
• Ensure the product is switched o.
• Connect the charging adaptor to the product and then to the mains.
• If the product is not going to be used for an extended period time (2 – 3 months),
unplug it from the mains and store.
• Fully recharge your hairclipper when you would like to use it again.
• Allow for 14-16 hours for a full charge for HC7130 and 2 hours for HC7151.
• HC7130: when charging the LED indicator will be illuminated and will remain
illuminated once the product is fully charged.
• HC7151: when charging the LED indicator will be illuminated and will turn o once the
product is fully charged.
• To preserve the life of your batteries, let them run out every 6 months then recharge for
14-16 hours.
• The HC7151 comes with a quick charge function, 10 minutes charging will give an
emergency burst of run time.
CHARGING VIA STANDARD ELECTRICAL SOCKET
Ensure the product is switched o.
Connect the charging adaptor to the product and then to the mains.
USB
Connect Micro USB to the appliance, and the USB connector to any standard USB port or
charger
Product will only charge through USB and will not run in corded mode.
CORDED USE
Connect the charging adaptor to the product then to the mains.
CAUTION Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
When the unit is switched on and fully charged, the product can be used in cordless mode
for up to 60 minutes for the HC7130 and up to 75 minutes for the HC7151.
ENGLISH
5
INSTRUCTIONS FOR USE
BEFORE STARTING THE CUT
• Inspect the clipper making sure that it is free from hair and dirt.
• Seat the person so that their head is approximately at your eye level.
• Before cutting, always comb the hair so it is tangle free and dry.
TO ATTACH A COMB
• Hold the comb with its teeth upward.
• To attach a comb, align the legs of the comb with the holes in the top of the clipper on
each side of the blade and slide the legs into the trimmer until they click.
• To remove, rmly pull the comb straight up away from the clipper.
HAIR CLIPPER COMB SETTINGS
• The clipper comes with two adjustable combs, a short length adjustable comb
(indicated by 1-21mm on the back of the comb) and a longer length adjustable comb
(indicated by 24-44mm on the back of the comb).
• Please see table below for dierent cutting lengths available on each comb.
Shorter Length Adjustable Comb Longer Length Adjustable Comb
1mm 24mm
3mm 26mm
6mm 29mm
9mm 32mm
12mm 35mm
15mm 38mm
18mm 41mm
21mm 44mm
• On the slide select switch there is a silver indicator which, when the short length
adjustable comb is on the product, shows the corresponding length setting on the left
of the slide select switch. On the other side of the slide select switch there is another
silver indicator which shows the corresponding length setting when the longer length
adjustable comb is on the product, on the right side of the slide select switch.
• To adjust the length settings, you must press the upper half of the slide select switch to
release the locking mechanism, then apply force upwards on the slide select switch to
increase the length setting. To decrease the length settings press the upper part of the
slide select switch down and slide downwards.
• Use the clipper without any xed combs for trimming hair close to the skin.
• This will trim hair to 1mm, holding the clipper so the blades are perpendicular to the
skin will trim hair to 0.5mm.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
N
O
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
