Znaleziono w kategoriach:
Rowerki biegowe (17)
Wróć
www.ricokids.pl
12m+
20 kg
Balance Bike
Rowerek biegowy
Kinderlaufrad
Vélo draisienne
Bicicletta senza pedali
Bicicleta sin pedales
Běžecké kolo
Futóbicikli
Bicicletă de echilibru pentru copii
Odrážací detský bycikel
Balansinis dratukas
Біговел дитячий
Велосипед за баланс
Ποδήλατο ισορροπίας
RK-605
Balance Bike
UA
RO
LT
HU
SK
BG
GR
ES
IT
FR
DE
PL
EN
CZ
760500 / 760501 / 760502
760503 / 760504 / 760505
760506 / v. 1.0
60kg
24m+
2
Hi! Thanks again for your purchase. We can wait to get your little one rollin’ on their first ever set of
wheels.
Please take some time to read the following notes to ensure the bike is it’s absolute safest, each and
every time they ride. Following these simple instructions will allow you to get the most out of your
purchase and keep your little one safe.
SAFETY INSTRUCTIONS
• Before every ride, please check all
fastenings are tight and secure. Bikes
vibrate and consistent maintenance is
required. All bolts, spokes, etc need to
be secure at all times
• Check tire pressure is maintained to
specifications on tire
• Adult assembly and supervision
required at all times when in use
• For personal safety, helmets, gloves,
shoes, elbow and knee pads are
recommended
•
•Do not allow more than one rider at a
time. Max Weight 60kgs
Not for use on public roads
• Replace worn or broken parts
immediately
• Recommend for ages 2.5 and up to
weight limit
Maintenance Instructions
- Refrain from storing in outdoor
conditions, avoid humid
environments, high temperatures and
intense sun exposure over long
periods
- Wash with damp cloth. Ensure to dry.
Do not use high pressure cleaners or
harsh solvents
- Regular maintenance by a qualified
bike technician is recommended for
maximum use
- Leaving in rain or snow, will like cause
rust and damage to components,
voiding warranty
ASSEMBLY INSTRUCTIONS
1) Ensure all items were included
Please check you received all items with
your purchase. If not please email us
immediately
-
-
-
-
-
-
-
-
2) H
Frame- preassembled with forks,
sealed head set, rear wheel and quick
release seat clamp
X1 front wheel
Seat and Seat Post
Handlebars
Grips x2
Padded Headset cover x1
Allan Key & Quick Assemble Tool
andlebar Assembly
- Use Allan key to loosen x4 headset
bolts, and remove front headset
bracket Fig 1
IINNSSTTRRUUCCAATTIIOONN
I
3
Figure 1 Figure 2
- Place handlebar in back of headset,
aligning in centre. You may wish to
measure the distance to ensure even,
or alternatively stand over the top of
the bike to line up centre of bars Fig 2
- Once the distance is even, replace
front bracket of headset, re-install x4
bolts and tighten
- Once bolts are tight, install the Head
Set Pad over the headset
3) Seat Assembly
-
-
Fig 3
4)
Loosen the quick release clamp on
bike frame and insert seat post. Fig 3
For height adjustment, either have
your child stand next to bike, raising
seat height to just under the hip.
Alternatively sit them on the bike and
raise till they are flat footed with
knees slightly bent
Front Wheel Assembly
-
-
Figur
SSiitt tthhee bbiikkee uuppssiiddee ddoowwnn oonn tthhee bbaarrss
aanndd sseeaatt ttoo kkeeeepp bbaallaanncceedd
LLoooosseenn tthhee bboollttss oonn eeaacchh ssiiddee ooff rriimm
ssoo tthheerree iiss ssuuffffiicciieenntt ssppaaccee oonn eeaacchh
aaxxllee ttoo ddrroopp iinnttoo
tthhee ffoorrkk lleeggFig 4
e 4 Figure 5
-
-
-
-
5)
Take washers and place then into the
fork leg insert to hold in place Fig 5
Tighten wheel nuts. You will need to
secure the nut on the other side of
the hub so that it doesn’t free turn.
Be sure no fasten securely but do not
over tighten as you will potentially
snap the axle, or inhibit the
performance of the wheel
Install that wheel nut covers firmly
over each end of the axle
Inflate Tires
- Inflate tires to specifications marked
on wheels
- Do not over inflate
- Check regularly
6) Check all fixings
- Your bike should now be all together
- Go back over all fastenings to ensure
that they are tightened correctly. It is
recommended that this is performed
before every use.
- IF YOU HAVE ANY ISSUES WITH
INSTALLATION, PLEASE EMAIL US
Figure 1 Figure 2
- Place handlebar in back of headset,
aligning in centre. You may wish to
measure the distance to ensure even,
or alternatively stand over the top of
the bike to line up centre of bars Fig 2
- Once the distance is even, replace
front bracket of headset, re-install x4
bolts and tighten
- Once bolts are tight, install the Head
Set Pad over the headset
3) Seat Assembly
-
-
Fig 3
4)
Loosen the quick release clamp on
bike frame and insert seat post. Fig 3
For height adjustment, either have
your child stand next to bike, raising
seat height to just under the hip.
Alternatively sit them on the bike and
raise till they are flat footed with
knees slightly bent
Front Wheel Assembly
-
-
Figur
SSiitt tthhee bbiikkee uuppssiiddee ddoowwnn oonn tthhee bbaarrss
aanndd sseeaatt ttoo kkeeeepp bbaallaanncceedd
LLoooosseenn tthhee bboollttss oonn eeaacchh ssiiddee ooff rriimm
ssoo tthheerree iiss ssuuffffiicciieenntt ssppaaccee oonn eeaacchh
aaxxllee ttoo ddrroopp iinnttoo
tthhee ffoorrkk lleeggFig 4
e 4 Figure 5
-
-
-
-
5)
Take washers and place then into the
fork leg insert to hold in place Fig 5
Tighten wheel nuts. You will need to
secure the nut on the other side of
the hub so that it doesn’t free turn.
Be sure no fasten securely but do not
over tighten as you will potentially
snap the axle, or inhibit the
performance of the wheel
Install that wheel nut covers firmly
over each end of the axle
Inflate Tires
- Inflate tires to specifications marked
on wheels
- Do not over inflate
- Check regularly
6) Check all fixings
- Your bike should now be all together
- Go back over all fastenings to ensure
that they are tightened correctly. It is
recommended that this is performed
before every use.
- IF YOU HAVE ANY ISSUES WITH
INSTALLATION, PLEASE EMAIL US
Figure 1 Figure 2
- Place handlebar in back of headset,
aligning in centre. You may wish to
measure the distance to ensure even,
or alternatively stand over the top of
the bike to line up centre of bars Fig 2
- Once the distance is even, replace
front bracket of headset, re-install x4
bolts and tighten
- Once bolts are tight, install the Head
Set Pad over the headset
3) Seat Assembly
-
-
Fig 3
4)
Loosen the quick release clamp on
bike frame and insert seat post. Fig 3
For height adjustment, either have
your child stand next to bike, raising
seat height to just under the hip.
Alternatively sit them on the bike and
raise till they are flat footed with
knees slightly bent
Front Wheel Assembly
-
-
Figur
SSiitt tthhee bbiikkee uuppssiiddee ddoowwnn oonn tthhee bbaarrss
aanndd sseeaatt ttoo kkeeeepp bbaallaanncceedd
LLoooosseenn tthhee bboollttss oonn eeaacchh ssiiddee ooff rriimm
ssoo tthheerree iiss ssuuffffiicciieenntt ssppaaccee oonn eeaacchh
aaxxllee ttoo ddrroopp iinnttoo
tthhee ffoorrkk lleeggFig 4
e 4 Figure 5
-
-
-
-
5)
Take washers and place then into the
fork leg insert to hold in place Fig 5
Tighten wheel nuts. You will need to
secure the nut on the other side of
the hub so that it doesn’t free turn.
Be sure no fasten securely but do not
over tighten as you will potentially
snap the axle, or inhibit the
performance of the wheel
Install that wheel nut covers firmly
over each end of the axle
Inflate Tires
- Inflate tires to specifications marked
on wheels
- Do not over inflate
- Check regularly
6) Check all fixings
- Your bike should now be all together
- Go back over all fastenings to ensure
that they are tightened correctly. It is
recommended that this is performed
before every use.
- IF YOU HAVE ANY ISSUES WITH
INSTALLATION, PLEASE EMAIL US
Figure 1 Figure 2
- Place handlebar in back of headset,
aligning in centre. You may wish to
measure the distance to ensure even,
or alternatively stand over the top of
the bike to line up centre of bars Fig 2
- Once the distance is even, replace
front bracket of headset, re-install x4
bolts and tighten
- Once bolts are tight, install the Head
Set Pad over the headset
3) Seat Assembly
-
-
Fig 3
4)
Loosen the quick release clamp on
bike frame and insert seat post. Fig 3
For height adjustment, either have
your child stand next to bike, raising
seat height to just under the hip.
Alternatively sit them on the bike and
raise till they are flat footed with
knees slightly bent
Front Wheel Assembly
-
-
Figur
SSiitt tthhee bbiikkee uuppssiiddee ddoowwnn oonn tthhee bbaarrss
aanndd sseeaatt ttoo kkeeeepp bbaallaanncceedd
LLoooosseenn tthhee bboollttss oonn eeaacchh ssiiddee ooff rriimm
ssoo tthheerree iiss ssuuffffiicciieenntt ssppaaccee oonn eeaacchh
aaxxllee ttoo ddrroopp iinnttoo
tthhee ffoorrkk lleeggFig 4
e 4 Figure 5
-
-
-
-
5)
Take washers and place then into the
fork leg insert to hold in place Fig 5
Tighten wheel nuts. You will need to
secure the nut on the other side of
the hub so that it doesn’t free turn.
Be sure no fasten securely but do not
over tighten as you will potentially
snap the axle, or inhibit the
performance of the wheel
Install that wheel nut covers firmly
over each end of the axle
Inflate Tires
- Inflate tires to specifications marked
on wheels
- Do not over inflate
- Check regularly
6) Check all fixings
- Your bike should now be all together
- Go back over all fastenings to ensure
that they are tightened correctly. It is
recommended that this is performed
before every use.
- IF YOU HAVE ANY ISSUES WITH
INSTALLATION, PLEASE EMAIL US
1
3
5
4
2
II
4
EN INSTRUCTION MANUAL
Thank you for purchasing this Ricokids product, designed with your child’s safety in mind. To
ensure a safe and trouble-free use, please read the following warnings and instructions, and store
them for future reference.
Product compliant with the following standards: EN 71-1:2014+A1:2018 | EN71-2:2020 |
EN71-3:2019+A1:2021
⚠ WARNINGS!
• This balance bike is suitable for children older than 24 months and up to 60 kg.
• To be operated only under the supersion of an adult, always keep your child within sight of an
adult.
• Assembly, disassembly and maintenance of the balance bike should be performed by an adult,
keep children away.
• During assembly, keep all components out of the reach of children.
• Store this manual for future reference.
• Choking hazard! Strangulation hazard! The packaging and balance bike may contain both small
and plastic parts (bags, lm) which pose a hazard to children. Keep these out of the reach of child-
ren. Plastic bags and other materials should be disposed of.
• Your child should be instructed on how to use the balance bike properly. Make sure that your child
is physically able to control the balance bike, and understands how to slow down and stop.
• This balance bike should be operated with caution. Riding it requires certain skills in order to
avoid falls or collisions causing injuries to the user or third parties.
• This product can only be used by one child at a time.
• Always wear protective equipment: a helmet, knee pads and elbow pads.
• Do not use this product in trac or on public roads.
• This balance bike can only be used on at and dry surface, without obstructions. It should not be
operated on hills, inclines, roads with trac, wet surfaces and gravel.
• This balance bike does not have brakes, so caution should be exercised.
• Do not use this product in the cinity of water reservoirs (rivers, pools etc.) or other obstructions.
• Do not use this product in the dark or in bad weather (rain, snow).
• Do not use this balance bike in the cinity of stairs or steps.
• Do not tow this balance bike with a car or any other vehicle.
• Make sure that the child wears proper shoes, a properly tted helmet and other protective equip-
ment (knee pads, elbow pads, gloves etc.). make sure that the shoes t properly and do not have
loose elements (e.g. shoelaces) that may snag on the bike components.
• Make sure that the child keeps both hands on the handlebar. Riding with no hands on the handle-
bar can cause an accident and would pose a serious threat to the child’s health and life.
• Regularly check the product and carry out necessary maintenance. Before each ride make sure
that the balance bike is not damaged, nothing is missing and the components are not loose.
• Before each ride make sure that all screws are tightened securely and components are properly
installed.
• Do not use the balance bike if any component is damaged or missing. Use only genuine spare
parts.
5
PARTS (FIG. I)
The parts needed for assembly and their initial placement are shown in Fig. I.
ASSEMBLY (FIG. II)
Follow the steps shown in Fig. II.
INSTRUCTION FOR USE
To be ridden only with an adult or caregiver present to superse and ensure safety. Sit on the sad-
dle, grip the handlebar tightly with both hands and push feet alternately against the ground. Aer
developing higher speed, raise the legs up to ride freely. In order to turn, move the handlebar in the
direction of the turn and balance your body. Put your feet onto the ground to stop the balance bike.
CLEANING AND MAINTENANCE
• Regularly check the condition of the balance bike.
• Cleaning and maintenance should only be performed by an adult.
• Lubricate the mong parts only if necessary, with a light application of a silicone based lubricant.
Wipe o excess lubricant with a clean cloth.
• Periodically check the balance bike for loose screws and other parts. Replace or repair the parts
as needed. Use only certied spare parts.
• In order to avoid friction which may cause the balance bike to work improperly, ensure that all
plastic parts placed along the metal frame are free of dust, dirt or sand.
• Store the balance bike in a dry place. Prolonged exposure to direct sunlight may cause degrada-
tion of the plastic parts.
• Before each ride, make sure that the product is not damaged and all screws are securely tighte-
ned.
• Replace worn or damaged parts, or stop using the product.
• Clean the balance bike with a damp cloth and then wipe it dry. Do not use caustic or abrasive
cleaning agents.