Znaleziono w kategoriach:
3-in-1 Wet & Dry Cordless Stick Vacuum Cleaner
INSTRUCTION MANUAL
Model:TT-LUX900
EN
Model:TT-LUX900
Technical: 22.2V 2200mAh Li-ion battery
PARTS DESCRIPTION
1. On/off switch
2. speed control switch
3. Button for removing handheld
vacuum cleaner
4. On/off switch for handheld item
5. Release buttons for removing
dust tank
6. 22.2V Battery
7. Handheld item
8. HEPA center filter
9. Filter holder
10. Dust compartment
11. 2in1Crevicenozzle
12. Adaptor
13. Brush roller
14. The lid for water tank
15. Water tank
16. Cloth
SAFETY
• By ignoring the safety instructions the manufacturer can not be hold responsible for the damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• Never move the appliance by pulling the cord and make sure the cord can not become entangled.
• The appliance must be placed on a stable, level surface.
• This appliance is only to be used for household purposes and only for the purpose it is made for.
• This appliance shall not be used by children from 0 year to 8 years. This appliance can be used by
children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Keep the appliance and its cord out of reach of children aged less than
8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and
supervised.
• To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the
water or any other liquid.
• The plug must be removed from the socket outlet before cleaning or maintaining the Appliance
BEFORE THE FIRST USE
Installation of the appliance
• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic
from the device.
• Assemble the vacuum cleaner by attaching the handle to the device
• Plug the adapter (12) in the hole as below of item and in the wall outlet
Charging hole
Charge
• link the device and power station with adaptor .
Note: Always make sure that the device is turned off.
The indicator lights will come on once the device has made contact with the device .
• It takes 4.5 hours to fully charge the batteries before the first use.
• When the device is totally discharged, approximately 4-4.5 hours
charging is required for the battery to regain full capacity.
• In order to ensure that it is always ready for use, the device should be left on charger when not
being used.
• The adaptor may become warm during charging, this is normal.
USE
• You should regularly check that 2-in-1 Crevice nozzle (11) and the brush roller (13) are clean in
order to avoid scratching sensitive floors.
• Start the device by pushing the on/off button (1) and control the high speed and low speed by
pushing the speed control switch (2).
• For tables, furniture and car seats you can remove the hand unit by pressing in the release
button(3). The hand unit will now come free and can easily be removed, and it can be started by
On/off switch for handheld item (4).
•The2in1Crevicenozzle (11) can be fitted in order to reach awkward places and you switch it to
be brush or Crevice nozzle by your hand as below
• Open The lid for water tank (14) to fill the water tank (15)with water and lock it up , assemble the
water tank (15) and the cloth（16）to device ,and start the device as normal , then you can Sweep
the floor by it!
CLEANING AND MAINTENANCE
Emptying and cleaning the dust compartment/filter
• Release the hand unit out of the handle
• Remove the whole dust container (10) by pressing the release button (5) and turn the dust
container.
• Pulling out the filters (8 & 9) and emptying the contents of the dust container into a suitable vessel
or bag.
• The dust container and the filter can be cleaned and rinsed with warm
water. Make sure the parts are dry before they are assembled.
• Assembling the parts by following up the opposite procedures when detaching the dust container.
Cleaning the electric turbo brush
• If the roller brush becomes blocked or jammed for any reason, the
vacuum will be lower down. Than the roller brush have to be cleaned.
• Carefully open the releasing slider as the pic below
• Lift out the roller brush and clean it.
• After cleaning you can assemble the turbo brush by following the opposite procedures.
Do not forget to Cleaning the wheels too.
• If a wheel is jammed by threads or dirt, to prevent wear you need to clean this by time.
• Remove the wheels by carefully prizing them loose using a screwdriver inserted into the cavity
and lift them up.