Znaleziono w kategoriach:
Power audio (8)
Wróć
ABTS-TK19
Bluetooth portable speaker
User Manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and
keep the manual for reference in future.
Description
1. Power (OFF/ON) switch
2. DC 5V charging port
3. TF card slot / USB port
4. MODE button
5. LED Switch (Long press to
close LED)
6. REPEAT
7. Volume knob
8. Button / TWS
9. Button
10. Button
11. Microphone input
12. AUX input
13. Display
1. STOP button
2. (POWER)button
3. MUTE button
4. REPEAT button
5. MODE button
6. EQ button
7. (NEXT) button
8. (PREVIOUS) button
9. (PLAY/PAUSE) button
10. VOL- button
11. VOL+ button
12. Numeric buttons
Important safeguards
•The instruction manual contains important
operating and maintenance instructions. For your
safety, it is necessary to refer to the manual.
Keep the manual for future use.
•Do not hit or drop the unit
•Do not expose the unit to vibration, direct
sunlight, too high or low temperatures or humidity.
•Do not disassemble the unit yourselves
Refer servicing to qualified servicepersonnel
All the illustrations in this manual are schematic
images, which may differ from actual objects.
Power supply
•The unit operates with an internal
rechargeable Li-ion battery.
•The battery can be recharged with the USB
charging cable provided by connecting to a DC
power supply source (5V)
•Insert the charging cable into the DC 5V
socket of the unit.
•For best results, try to fully charge the
battery before each use. If the battery is empty,
please allow it to recharge for a few hours.
•Push the OFF/ON switch into ON position
(to the right) to switch the unit on. Put it into OFF
position (left) to switch off.
General operation
Bluetooth wireless playback
•This unit can wirelessly playback audio
from any device with Bluetooth A2DP function.
•The wireless range is approximately within
10 meters in direct line of sight
•Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
How to pair your device to this unit:
•Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
•Switch on the unit and press the MODE
button repeatedly to select the Bluetooth mode
(selected by default). The display will show "bt".
•Once the Bluetooth pairing indicator begins
flashing, you will find the unit listed in the
Bluetooth connections list of your device (as
ABTS-TK19)
•If asked for a passcode, enter “0000”.
•The initial setup is required only once
per device. The unit will automatically pair to the
last paired device.
•The LED indicator will flash when
searching for a Bluetooth device and stay on
when the devices are paired.
•When playing files, you can press the
button to pause and resume playback.
•Press the or button to go to a
previous or next track. Rotate the volume knob
or press the volume buttons to adjust volume.
External device connection
•You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speaker.
•To connect an external audio device,
please use the included audio cable with 3.5mm-
to-3.5 mm plugs to connect the headphone out or
audio line-out of the external device to the AUX
input of this unit.
•Press MODE button to select the AUX
mode.
•Turn on the external device. You can press
the volume buttons to adjust volume.
USB/ Micro SD operation
Playback
•Turn on the device.
•Insert a microSD (TF) card into the slot.
•Or insert a USB drive into the USB
port. Press the MODE button repeatedly to
select the USB or MicroSD mode.
•When playing, you can press to
play/pause the playback.
•During the playback you can press the
and buttons to go to the previous
and next track. Rotate the volume indicator to
adjust volume.
It may take up to 60 seconds to open
and verify a large microSD card / USB drive
with many files.
•Press the EQ button to switch
between various equalizer presets. EQis
only available in the BT and USB/TF
modes.
General USB/MicroSD notes
•This unit is equipped with a microSD slot
and USB port that can read and play MP3
files stored on standard microSD cards and
USB drives up to 32 GB.
•FAT and FAT32 file system is supported
by this unit.
Never remove microSD cards and USB drives
from the unit during playback, always stop
playback, then press the MODE button to
switch to another mode before removing the
storage to prevent damage to your files and
cards/drives themselves.
If there is a microSD card or USB drive
installed in the unit, when powered on, playback
will automatically start from microSD/USB.
Slight noise during playback pauses is not a
construction defect, it is determined by the
factory presets of the dynamic noise reduction
system.
FM Radio
•Turn on the device.
•Press the MODE button repeatedly to select
the FM mode.
•Press SCAN to automatically scan and
save all available radio stations. The procedure
will take several minutes and cannot be
interrupted.
•Radio frequency can be set manually using
the numeric buttons on the remote control.
•Once the search is finished, you can press
the and buttons
to go to a previous or next radio station. Also
you can input the frequency directly using the
numeric buttons on the remote.
Microphone
•You can connect a microphone (not
provided) for karaoke or other purposes into
this unit by connecting it to the 6.35mm
microphone input jack. Please do not plug the
microphone when the unit is charging.
•While connected, you can control the
microphone volume and echo effect by rotating
the corresponding knob on the top panel.
TWS Function
(True wireless stereo technology) TWS technology
enables user to make wireless connection between
two speakers which are same model and compatible
with TWS. In TWS connection, two speakers will be
automatically grouped to be a Stereo-Speaker System
which outputs the left and right channel.
HOW TO ESTABLISH CONNECTION
Notice: Two speakers must be same model and both
compatible with TWS.
1. Please switch on both speakers and select
"Bluetooth" mode;
2. Press and hold PLAY button (09) on the unit, you
will hear a "beep". It becomes the main speaker (left
channel), which will automatically search and connect
with another speaker
(right channel). After connection, you will hear a
"beep";
3. Connect mobile phone or Bluetooth player to the
speaker by Bluetooth. After connection, you can play
music with the TWS Stereo- Speaker System.
4. After connection, press and hold PLAY button (09)
on either unit to disconnect TWS. You will hear a
"beep" while disconnecting successfully.
TWS function operates in TWS mode, manipulations
to the main speaker will be simultaneously affected in
another speaker. For example, volume adjustment,
previous and next song selection, play and pause,
power on and off.
Note:
- If the 2 loudspeakers are not paired, switch off both
devices and repeat steps 1, 2 and 3.
- The TWS function only works between equal
speakers or with other speakers that use the same
micro-processor or solution.
Maintenance and care
•Switch off the unit, unplug from the power
supply. The outside of the appliance can be
cleaned with a slightly damp cloth.
Accessories
•1 x AUX cable
•1 x Remote control (with battery)
•1 x Instruction manual
•1 x Speaker
•1 x Charging cable
Technical specifications
Power Source
DC 5V/2A
Power Consumption
MAX 10W
RMS Power
8W
Bluetooth version
V5. 0 BDR+EDR
BTH channel emission power
4bBm
Bluetooth frequency
2,402 GHz- 2,480 GHz
Bluetooth range
10 m
FM frequency
87.5-108
Battery type
Li-ion, 3.7V, 3600 mAh
Speakers
6.5"×2
Frequency response
60HZ-16KHZ
Product dimensions
25*22.2*53.3 cm
Specifications and functions are subject to change without notice. It is connected with continual
improvement of the device.
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on the product or packaging means that the product should not be treated
as household waste. Do not throw garbage at the end of its life, but take it to a
collection center for recycling. in this way you will help to protect the environment and
be able to prevent any negative consequences that it would have on the environment
and human health.
To find your nearest collection center:
oContact local authorities
oAccess the website: www.mmediu.ro
oRequest additional information from the store where you purchased the product.
IMPORTER SC INTERVISION TRADING-RO SRL
Street I.C Bratianu, no. 48-52, building A, floor. 5,
room 504-505, Pitesti City, Arges County, Romania
Post code: 110121