Instrukcja obsługi Latarka czołowa ARMYTEK Wizard C2 Pro Max LR F06702PC

2 ENG USER MANUAL

6 GER BENUTZERANLEITUNG

10 FRA MANUEL D’UTILISATEUR

14 RUS РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

18 FIN KÄYTTÖOHJE

22 SWE ANVÄNDARMANUAL

26 NOR BRUKSANVISNING

30 POL INSTRUKCJA OBSŁUGI REV_00-0000

WIZARD C2

boxes. The flashlight is easily installed, removed and 180° rotatable in

the mount. Quick-release silicone ring provides additional fixation

2. Every Day Carry light: compact design, convenient side button,

special matt anti-abrasive finish without rough knurling. Durable nylon

holster, robust removable steel clip and strong built-in tail magnet

3. Sports flashlight: body made from durable and lightweight

aircraft-grade aluminium, improved shock resistance. New springs for

better battery and driver protection, constant light without flickering.

Multiple variants of installation, optional accessories for mounting on

sporting gear

• Special precisely calculated reflector for powerful wide LED and tem-

pered glass with anti-reflective coating create large central spot and

• Innovative technology allows using any standard 21700 Li-Ion or

18650 Li-Ion battery with 15A discharge current. Full protection

nector and metal objects

• Active real-time temperature control to prevent overheating above

+58 °C

• Robust and water resistant magnetic connector

ENG USER MANUAL

Thank you for choosing the products of Armytek.

Please read this manual carefully before using the flashlight.

user manual.

The producer reserves the right to change the package at his own

discretion without modifying this manual. Specifications are sub-

ject to change without notice.

Initial Service

TO SET/REPLACE BATTERY

1. Unscrew the tailcap.

2. Place the battery with the positive contact (+) facing the head of

the flashlight.

3. Adjust the tailcap and tighten it as far as it can go.

• Green — device is in waiting mode.

Charger plugged in:

• Green blinking — evaluation of battery voltage.

• Red blinking — unscrew the tailcap to 1/4 for charging.

• Orange blinking — USB power source voltage is too low for correct

Clean the tailcap and the threads of the flashlight parts, use a die-

• Orange — USB power source voltage is too low, charging current is

reduced.

• Green — charging is finished.

Operation

Before use: Tighten the tailcap as far as it can go.

Modes: Firefly1, Firefly2, Main modes, Turbo mode (last used in

Advanced, Turbo2 by default).

In OFF state

Press and hold: To start cycling through Firefly modes. Release to

2 clicks: To turn on Turbo mode from any mode. The second double click

brings back last used mode.

To switch between types of operation unscrew the tailcap to 1/4 while

the flashlight is o, press the button and tighten the tailcap while

keeping the button pressed.

[1] – Firefly modes, [2] – Main modes, [3] – Turbo modes,

[4] – Strobe modes

In OFF state:

Press and hold: To turn on Firefly1 mode [Section 1]. Keeping button

pressed will start cycling through modes: Firefly1 - Firefly2 - Main1 -

Main2 - Main3 - Turbo1.

1 click: To turn o the flashlight.

4 clicks: To turn on Strobe mode [Section 4].

Automemorizing. After switching o the last used mode is memorized

for quick access at next switching on.

Lock-out function. Unscrew the tailcap to 1/4 for protection from

accidental switching on. Multicolor indication will be turned o.

Safe high brightness modes. Turbo modes give maximum brightness

until the temperature of the flashlight and discharge current of the

battery exceed critical values.

Safe Soft-Start System allows increasing runtimes, getting lon-

ger battery life and protecting the battery from overdischarge or

The flashlight has a multicolor temperature, battery level and state

indication (indication by the color LED in the button), as well as a low

battery level indication by light (indication by the main LED of the

flashlight). The flashlight indication in ON state includes a multicolor

battery level and temperature indication, and low battery level indica-

tion by light. When the flashlight is in OFF state, there is a multicolor

state indication.

Battery level is more than 25%. The color LED in the button flashes

modes and Main1) drops below approximately 25% from the nominal

value, the main LED flashes 2 times. When the battery level becomes

critical, less than approximately 10%, the color LED flashes red 1 time

every second.

to the warning level, the color LED in the button flashes orange 3 times

every 2 seconds. At critical level the LED flashes red 3 times every

second. The brightness begins to decrease to a safe level.

Multicolor state indication. Short flashes of the LED in the button

every 4 seconds show the battery level when the flashlight is in OFF

The indication also helps to find the flashlight in the dark.

3. The indication is switched o in any state.

To change the operating mode, unscrew the tailcap to 1/4 while the

flashlight is o, press the button and keeping the button pressed, tight-

will switch cyclically. The settings will be memorized even when the

battery is changed. Ultra-low current consumption allows multicolor

indication to work for a maximum period of time.

attention as very bright light might heat objects and cause fire.

it is necessary to activate the lock-out function to ensure protec-

tion from accidental switching on.

It is forbidden to charge the battery inside the flashlight when the

ambient temperature is below 0 °C.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

deprive you of the warranty.

5. Do not allow water or any other liquid to leak into the flashlight.

can cause temporary blindness.

was caused by improper use of the product.

It is recommended to clean the threads and O-rings o dirt and old

water and dust cannot be provided by worn-out sealing. The fouling as

well as lack of grease cause fast wear-out of the threads and sealing

1. Unscrew the tailcap and remove the sealing rings carefully with a

toothpick (do not use sharp metal objects as they can damage the

rings).

2. Wipe the sealing rings thoroughly with a soft cloth (or tissue). Do not

use solvents. If the sealing ring is worn out or damaged, replace it

In case of active operation and exploitation in dusty environments, it is

recommended to clean and grease the parts as often as the necessity

non-rechargeable) inside the flashlight for a long storage period, as

they can leak for various reasons and damage the inner parts of the

flashlight. If you want to keep your flashlight in a stand-by state with

batteries in, previously install new and high-quality batteries, store

the flashlight in acceptable for batteries operational temperature and

signs of defects, withdraw the batteries from the flashlight and dispose

batteries, chargers, mounts, holders, switches and connectors, which

have 2-year warranty) from the date of purchase if there is a document

confirming the purchase.

and buttons, silicone installation rings and holders, clips, silicone grips,

holsters, lanyards, adapters, O-rings and pads, Velcro tapes. The war-

ranty also does not extend to damage during:

2. Attempts to modify or repair the flashlight by nonqualified