DOBERMANN
PRO MAX
TACTICAL FLASHLIGHT
REV_00-0000 1
A
B
D
C
1
1
2
ENG Scan to view full manual. GER Zum Einblick in volle
Anleitung bitte scannen. FRA Scannez afin de visualiser la
notice complète. RUS Cканируйте для просмотра полной
инструкции. FIN Skannaa koko ohjeen näkemiseksi.
SWE Skanna för att se fullständig användarmanual.
NOR Skann for å se hele bruksanvisningen. POL Zeskanuj,
aby przejrzeć instrukcję w całości.
4 ENG USER MANUAL
7 GER BENUTZERANLEITUNG
10 FRA MANUEL D’UTILISATEUR
14 RUS РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
18 FIN KÄYTTÖOHJE
21 SWE ANVÄNDARMANUAL
24 NOR BRUKSANVISNING
27 POL INSTRUKCJA OBSŁUGI
3
Before use: Tighten the tailcap as far as it can go [A1].
The flashlight is operated using two buttons. The tactical
button in the tailcap turns the flashlight on/o [B].
The side button switches the modes [C].
On/o. Full pressing of the tactical button with a click.
If automemorization of the last used mode is enabled,
the flashlight turns on in the last used Main mode or Turbo.
If automemorization is disabled (by default), the flashlight
is turned on in Turbo mode.
Tactical activation. Half-pressing of the tactical button
without a click from the o state. The flashlight is activated
in the last used Main mode or Turbo until the button
is released. If automemorization is disabled (by default),
the flashlight is turned on in Turbo mode.
Cycling through constant light modes (except Firefly
mode). Press the side button of the flashlight when it is on.
Each press switches the mode. The modes switch cyclically.
If the side button is pressed when the flashlight is o,
cycling through the modes does not occur.
Activation of Strobe mode (if enabled). The flashlight
is on: two quick successive pressings of the tactical
button with a click with a minimal pause between them.
The flashlight is o: half-pressing of the tactical button
followed by a quick pressing with a click with a minimal
pause between them.
Tactical activation of Strobe mode (if enabled).
Two quick successive half-pressings of the tactical button
with a minimal pause between them from the o state.
The flashlight is activated until the button is released.
Activation of Firefly mode. Press and hold the side
button, press the tactical button with a click while holding
the side button pressed. Release the side button. The next
pressing of the side button will activate Turbo mode.
Tactical activation of Firefly mode. Press and hold the
side button, press the tactical button with a half-pressing
while holding the side button pressed. Release the side
ENG USER MANUAL
Thank you for choosing the products of Armytek. Please
read this manual carefully before using the flashlight.
4
button while continuing to hold the tactical one. The next
pressing of the side button will activate Turbo mode. The
flashlight is activated until the tactical button is released.
To enable/disable Strobe mode. Press the side button
of the switched-on flashlight and hold it for 5 seconds.
The flashlight will flash once. Release the button.
To enable/disable automemorization. Press the side
button of the switched-on flashlight and hold it for 10 sec-
onds. Keep holding the button pressed when the flashlight
flashes once after 5 seconds. After another 5 seconds, the
flashlight will flash twice. Release the button.
Lock-out function. Unscrew the tailcap to 1/4 for
protection from accidental switching on.
USE OF CR123A BATTERIES
yThe flashlight is compatible with 2хCR123A lithium
batteries.
yUse only high-quality batteries from proven
manufacturers.
yDo not use dierent batteries together, for example
old with new, discharged with charged, batteries of
dierent types.
yIt is forbidden to charge CR123A batteries inside
the flashlight.
HOW TO CONNECT THE MAGNETIC CHARGER
Tighten the tailcap of the flashlight as far as it can go. Con-
nect the magnetic charger to a power source with a USB
output and to the magnetic port on the flashlight [D1].
It is recommended to charge the flashlight in the o state.
CHARGER COLOR INDICATION
Charger not plugged in:
Green — device is in waiting mode.
Charger plugged in:
Red — charging is going on.
Green — charging is finished.
To achieve the stated charging time (2 h 45 min),
a power supply with a voltage of 5V and a minimum
current of 2A must be used.
5