00221847
TV HEADPHONES
“Dongle”
GOperating Instructions
DBedienungsanleitung
FMode d‘emploi
EInstrucciones de uso
NGebruiksaanwijzing
IIstruzioni per l‘uso
PInstrukcja obsługi
HHasználati útmutató
MManual de utilizare
CNávod k použití
QNávod na použitie
OManual de instruções
SBruksanvisning
RРуководство по эксплуатации
BРаботна инструкция
JΟδηγίες χρήσης
TKullanma kılavuzu
LKäyttöohje
10
11
1
2
3
4
5
8
9
6
7
A
B
C
4
GOperating Instructions
1. Controls and displays
1. Integrated microphone
2. USB-C charging socket
3. 3.5 mm jack socket
4. Telephone Answer - Reject - Hang up
5. Volume +
6. Volume -
7. On/Off switch
8. Mode button (Full - Voice - Normal)
9. Function LED
10. Pairing button (2.4 GHz)
11. 3.5mm jack socket (audio signal IN - from TV)
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for
future reference. If you sell the device, please pass these operating
instructions on to the new owner.
2. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specic hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
3. Explanation of product marking symbols
2–2
W
The power of the charger must range from a
minimum power of 2.0 watt required by the radio
system to a maximum power of 2.0 watt required to
achieve the maximum charging speed.
The standardised USB interface means that a
charger with a higher output power can also be
used.
4. Package contents
•1x TV headphones
•1x USB-C charging cable
•1x 2.4 GHz dongle
•1 x audio cable
•1 x instruction manual
5. Safety instructions
•The product is intended for private, non-commercial use only.
•Use the product only for the intended purpose.
•Children should be supervised to ensure that they do not play with
the product.
•Do not use the product in areas in which electronic products are
not permitted.
•Do not attempt to service or repair the product yourself. Leave any
and all service work to qualied experts.
•Do not open the device or continue to operate it if it becomes
damaged.
•Do not bend or crush the cable.
•Do not drop the product and do not expose it to any major
shocks.
•Dispose of packaging material immediately in accordance with
the locally applicableregulations.
•Do not modify the product in any way. Doing so voids the
warranty.
•Protect the product from dirt, moisture and overheating and use it
in dry environments only.
•Do not use the product in the immediate vicinity of heaters, other
heat sources or in direct sunlight.
•Only use the article under moderate climatic conditions.
•As with all electrical products, this device should be kept out of the
reach of children!
•Do not operate the product outside the power limits given in the
specications.
•Do not use the product in a damp environment and avoid
splashing water
•While driving a car or using sports equipment, do not allow
yourself to be distracted by your product and keep an eye on the
trac situation and your surroundings.
•The battery is permanently installed and cannot be removed;
dispose of the product as a whole in accordance with the statutory
regulations.
•Do not incinerate the battery or the product.
•Do not tamper with or damage/heat/disassemble the batteries/
rechargeable batteries.
•Do not use the product during the charging process!
Warning - rechargeable battery
•Only use suitablecharging devices or USB ports to charge the
product.
•Do not use defective chargers or USB ports and do not attempt
to repair them.
•Do not overcharge the product or allow the battery to
completely discharge.
•Avoid storing, charging and using in extreme temperatures
and at extremely low atmospheric pressures (such as at high
altitudes).
•When stored over a long period of time, batteries should be
charged regularly (at least every three months).
Warning - magnets
•This product generates magnetic elds. Individuals with
cardiac pacemakers should consult a doctor before using this
product as it may affect the pacemaker's proper function.
•Do not store bank or similar cards with magnetic strips near
the charging case or earphones. The data on the cards could
be damaged or completely deleted.
5
Warning - high volume
•High sound pressure!
•There is a risk of hearing damage.
•To prevent any loss of hearing, avoidlistening at loud volumes
for prolonged periods.
•Always keep the volume at a reasonable level. Loud volumes
can damage hearing – even over short periods.
•Using this product limits your perception of
ambient noise. For this reason, do not operate
any vehicles or machines while using this
product.
6. Installation and commissioning
6.1 Transmitter installation
•Connect the 2.4 GHz dongle to a suitable USB port on your TV
for power supply.
•Now connect the audio output of your TV to the jacksocket of
the dongle using the audio cable supplied.
6.2 Receiver installation
•Charge the headphones fully before using them for the rst time.
LED lights up red.
•Switch the headphones on (7). LED ashes cyan.
•The headphones automatically recognise the 2.4 GHz signal and
the LED lights up blue.
•Alternatively, the headphones can be operated via BT. If
the headphones do not receive a signal from the 2.4 GHz
transmitter, they automaticallyswitch to BT reception. Select
"hama TV-Headphones Dongle" in your playback source. After
successful pairing, the LED lights up green.
6.3 Switching on/off
ON: Press the On/Off button (7) for approx. 2 seconds, the
announcement "Power On" sounds.
OFF: To switch off, press the On/Off button (7) for approx. 3
seconds, the announcement "Power OFF" sounds.
Note – Automatic switch-offof the
headphones
The headphones are equipped with an automatic switch-off
mechanism. If there is no connection to your device within 3
minutes, they switch off automatically.
7. Charging
Fully charge the headphones once before using them for the rst
time.
7.1 Switch off the headphones and connect them
Ensure that the headphones are switched off before charging
them.
Connect the USB charging cable included to the charging socket
(2). Connect the free plug on the USB-C charging cable to a
suitable USB charger. To do this, consult the operating instructions
for the USB charger you are using.
7.2 Charging process for the headphones
The LED (9) lights up solid red during the charging process.
Once the charging process is complete, the LED (9) goes out.
It can take up to 2.5 hours for the battery to be fully charged.
7.3 Battery capacity
When the headphone battery capacity is low, the LED (9) ashes
red and the announcement “Battery Low” is heard.
8. Bluetooth®connection (pairing) - Alternative use -
directly without dongle
Note - pairing
•Ensure that the Bluetooth®-enabled device is switched on and
that the Bluetooth®function is activated.
•Please refer to the operating instructions of your device for more
information.
The headphones and the device should not be more than 1 metre
apart. The shorter the distance, the better.
Switch the headphones on using the On/Off button (7).
Press the Vol+ (5) and Vol- (6) buttons simultaneously for 3
seconds until you hear "Pairing".
If the LED (9) is flashing alternately blue and the
announcement:
Headphones searching for a Bluetooth®connection.
When the LED (9) lights up green and the announcement:
The headphones are already paired with a Bluetooth®device.