Znaleziono w kategoriach:
Nianie elektroniczne (11)
Wróć
2
EN – INSTRUCTIONS
PACKAGE CONTENTS
− 1× camera (child unit)
−1× parent unit
− 2× USB adapter
− 2× USB-C cable
− 1× wall mounting accessory
−1× instructions
−1× safety instructions
PRODUCT DESCRIPTION
Camera (child unit)
2
1
3
4
6
5
8
7
9
IN-5V
PAIR
1) Light sensor
2) Lens
3) Infrared diodes for night vision
4) Microphone
5) Antenna
6) Speaker
7) Temperature sensor
8) USB-C input for power cable
9) Pairing button
2 3
Parent unit
1 2
5
11
12
7
3
6
8
4
9
10
15
14
13
16
1) VOX button
2) ON/OFF button
3) HOME/BACK buttons
4) CAMERA SELECT button
5) Charging indicator light
a. Flashing red light – low battery
b. Steady blue light – charging
c. No light – fully charged
6) DIRECTION buttons
7) Button OK/ZOOM
8) Signal indicator light
a. Green light (ashing slowly) –
camera not connected
b. Green light (ashing rapidly) –
connecting the camera
c. Green light (steady) – camera connected
9) CALL button
a. Hold to activate two-way communication
10) LULLABY button
a. Press to switch the selected lullaby on/o
11) Microphone
12) Camera volume indicator (child unit)
13) Antenna
14) USB-C input for power cable
15) Speaker
16) Stand
4
LOCATION OF CHILD UNITS
1. option: on horizontal and solid surface
2. option: on a vertical surface
a. Use the included mounting attachment.
b. In the package you will nd a set of screws and wall plugs to mount the extension on a solid, clean
and at surface.
c. Once the attachment is rmly in place, screw the camera onto the thread and make sure it holds
rmly.
3. option: using the TrueLife NannyCam Holder
a. Roll up and securely lock the TrueLife NannyCam Holder (sold separately) to the selected location.
b. Then screw the camera onto the thread on the underside.
PAIRING THE CAMERA
The camera and parent unit are already paired from the factory and just need to be switched on. If you
need to pair the camera and the parent unit again (or pair another camera), follow the steps below.
1. Press and hold the pairing button on the camera.
2. Press the HOME/BACK button on the parent unit.
3. Select Camera → Add camera using the button → select the camera position and conrm with
OK button.
4. Hold the pairing button on the camera for about 3 seconds.
5. If the pairing is successful, the camera image will appear on the parent unit and the green status light
on the parent unit will illuminate.
CAMERA ROTATE
You can remotely control and rotate the camera using the parent unit. Just wake up the parent unit by
pressing any button and then use the DIRECTION buttons to rotate the camera in all directions.
BASIC FUNCTIONS
VOLUME SETTING
Select the icon and set the desired volume of the parent unit.
BRIGHTNESS SETTING
Select the icon and set the desired brightness level for the parent unit.
CAMERA MANAGEMENT
Here you can manage the connected cameras. You can add a new one/display a specic one/remove a
selected one. The parent unit can control up to 4 cameras.
VOX MODE (SLEEP MODE)
You can set the power-saving VOX mode for the parent unit to extend battery life. The parent unit will
turn o the display and wake up only when the child unit detects a sound. You can set the sensitivity
according to which the unit will respond (low/medium/high sensitivity). You can also quickly switch
VOX mode on/o using the button on the parent unit.
FEEDING REMINDER
The parent unit can remind you that it‘s time to feed the baby. You can set a reminder after 2/4/6 hours.
4 5
LULLABIES
Here you can select and play one of the 5 lullabies, set its volume or repeat it On a loop. You can then
switch the selected lullaby on/o using the button on the parent unit.
SETTINGS
Here you can set Celsius or Fahrenheit units and a temperature alarm which will alert you if the room
temperature drops or exceeds the value you set. You can also set it automatically to turn o the screen
, the volume of alerts or reset the baby monitor to factory settings .
RANGE
− The maximum range of the baby monitor is 300 m in an open area and 50 m in a building.
−The maximum range of the baby monitor and signal transmission may be aected by the envi-
ronment in which you use the baby monitor, such as thick walls, reinforced concrete structures,
etc.
−If the connection is lost due to too great a distance from the child unit, the parent unit will indicate
this on the display.
SPECIFICATIONS
Parent unit
Display 3.2" LCD, (320×240)
Battery life (screen on) Up to 8 hours
Battery life (VOX mode) Up to 12 hours
Power input USB-C
Energy consumption 5 V / 1 A
Batteries 1500 mAh
Dimensions 120 × 71 × 18 mm
Weight 125 g
Camera (child unit)
Resolution 640 × 480
Pan 355° (allows 360° viewing)
Tilt 105° (allows 115° viewing)
Automatic night vision Yes (visibility up to 5 m)
Power input USB-C
Energy consumption 5V / 1 A
Dimensions 70 × 105 × 80 mm
Weight 176 g