-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
MANUAL
BLUETOOTH MICROPHONE SPEAKER
BMS-400
MANUALMANUAL
BLUETOOTH MICROPHONE SPEAKERBLUETOOTH MICROPHONE SPEAKER
BMS-400BMS-400
2
AUX
5 V DC
TF
USB
6.
7. 8.
2
AU
X
5 V
DC
TF
US
B
6.
7.
8.
3
ECH
VOL
2.
3.
4.
5.
9.
1.
3
EC
H
VO
L
2.
3.
4.
5.
9.
1.
4
EN EN
Thank you for purchasing a product by Forever. Before use, please refer to the
User’s manual, and save it for future reference. Do not disassemble the device
on your own – all repairs should be done by a service technician. Use only ori-
ginal parts and accessories provided by the manufacturer. The device should
not be exposed directly to water, moisture, sunlight, fi re or other heat sources.
We hope that the product by Forever fulfi lls your expectations.
Image description
1. Microphone, LED light.
2. Treble adjustment
3. Echo loudness adjustment.
4. Reduce volume, previous track.
5. Turn on/off the device, Play/Pause.
6. MicroSD cards slot.
7. USB output.
8. 5 V DC charging connector.
9. Increase volume, next track.
Specifi cation:
Capacitive microphone
Loudspeaker power: 3W
Bandwidth: 100 Hz- 10k Hz
Maximum gain: 115 dB 1kHz THD <1%
Built-in battery: Li-Ion 1500mAh.
Bluetooth: 4.0
Echo mode
Supply volume: 5 V DC
Battery operation time: up to 6 hours
Charging time: 2 hours
Charging
Connect USB/micro USB cable provided in the kit to a 5V DC voltage supply
source . Network charger with USB out can be the supply source. Connect the
other end of the cable to micro USB port in the microphone. Charging is signal-
led with red LED on the power switch. When fully charged, the LED goes off .
When the microphone is fully charged, disconnect it from the power supply.
Turning on
Press and hold power switch on the microphone until LED on the power switch
is on.
4
EN
EN
Thank you for purchasing a product by Forever. Before use, please refer to the
User’s manual, and save it for future reference. Do not disassemble the device
on your own – all repairs should be done by a service technician. Use only ori-
ginal parts and accessories provided by the manufacturer. The device should
not be exposed directly to water, moisture, sunlight, fi re or other heat sources.
We hope that the product by Forever fulfi lls your expectations.
Image descriptionImage description
1. Microphone, LED light.
2. Treble adjustment
3. Echo loudness adjustment.
4. Reduce volume, previous track.
5. Turn on/off the device, Play/Pause.
6. MicroSD cards slot.
7. USB output.
8. 5 V DC charging connector.
9. Increase volume, next track.
Specifi cation:Specifi cation:
Capacitive microphone
Loudspeaker power: 3W
Bandwidth: 100 Hz- 10k Hz
Maximum gain: 115 dB 1kHz THD <1%
Built-in battery: Li-Ion 1500mAh.
Bluetooth: 4.0
Echo mode
Supply volume: 5 V DC
Battery operation time: up to 6 hours
Charging time: 2 hours
ChargingCharging
Connect USB/micro USB cable provided in the kit to a 5V DC voltage supply
source . Network charger with USB out can be the supply source. Connect the
other end of the cable to micro USB port in the microphone. Charging is signal-
led with red LED on the power switch. When fully charged, the LED goes off .
When the microphone is fully charged, disconnect it from the power supply.
Turning onTurning on
Press and hold power switch on the microphone until LED on the power switch
is on.
5
EN
Turning off
Press and hold the power switch. When the power switch is released, micro-
phone turns off and the LED on the power switch goes off .
Pairing built-in loudspeakers with a phone
1. Turn the microphone on.
2. Start the Bluetooth module in your phone.
3. Find a device ,,BMS-400”.
4. When pairing the devices, used may be asked to enter PIN code. Standard
code is ,,0000”.
When connecting Audio-in cable to micro USB port, Bluetooth connection is
lost.
Playing music on built-in loudspeakers (Bluetooth)
1. Part the microphone with your device.
2. Start music application on your phone.
3. Play the music.
Track change
Tracks may be changed using buttons „V+,|<” or „V-, >|”.
Volume change
Volume may be increased by pressing and holding „V+,|< „ button. Volume may
be reduced by pressing and holding „V-, >|” button.
Listening to music from microSD/via USB
Insert a memory card to the TF slot or a memory stick to the USB port to listen
to music. The loudspeaker will automatically switch to play mode. Removing
microSD card/memory stick causes return to a previous operation mode.
Using the microphone
After starting the device, the microphone is on by default. Voice / sound should
be directed directly to the top of the microphone, because sound sensor is
directional.
Using Audio-in cable
1. Turn the microphone on.
2. Connect the Audio-in cable to micro USB port in the microphone.
3. Connect the other end to a sound source (mini-jack).
4. Play the music on a device the cable is connected to, it will be played using
the loudspeakers built-in in the microphone.
When connecting Audio-in cable, Bluetooth function turns automatically off .
5
EN
Turning off Turning off
Press and hold the power switch. When the power switch is released, micro-
phone turns off and the LED on the power switch goes off .
Pairing built-in loudspeakers with a phonePairing built-in loudspeakers with a phone
1. Turn the microphone on.
2. Start the Bluetooth module in your phone.
3. Find a device ,,BMS-400”.
4. When pairing the devices, used may be asked to enter PIN code. Standard
code is ,,0000”.
When connecting Audio-in cable to micro USB port, Bluetooth connection is
lost.
Playing music on built-in loudspeakers (Bluetooth)Playing music on built-in loudspeakers (Bluetooth)
1. Part the microphone with your device.
2. Start music application on your phone.
3. Play the music.
Track changeTrack change
Tracks may be changed using buttons „V+,|<” or „V-, >|”.
Volume changeVolume change
Volume may be increased by pressing and holding „V+,|< „ button. Volume may
be reduced by pressing and holding „V-, >|” button.
Listening to music from microSD/via USBListening to music from microSD/via USB
Insert a memory card to the TF slot or a memory stick to the USB port to listen
to music. The loudspeaker will automatically switch to play mode. Removing
microSD card/memory stick causes return to a previous operation mode.
Using the microphoneUsing the microphone
After starting the device, the microphone is on by default. Voice / sound should
be directed directly to the top of the microphone, because sound sensor is
directional.
Using Audio-in cableUsing Audio-in cable
1. Turn the microphone on.
2. Connect the Audio-in cable to micro USB port in the microphone.
3. Connect the other end to a sound source (mini-jack).
4. Play the music on a device the cable is connected to, it will be played using
the loudspeakers built-in in the microphone.
When connecting Audio-in cable, Bluetooth function turns automatically off .
