-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
PremiumWeather Station
Wetterstation
00
186380
E
SK
F
D
GB
I
S
PL
RUS
H
BG
CZ
FIN
RO
GR
NL
P
Operating Instructions
Bedienungsanleitung
Mode d‘emploi
Instrucciones de uso
Gebruiksaanwijzing
Istruzioni per l‘uso
Instrukcja obsługi
Használati útmutató
Manual de utilizare
Návod kpoužití
Návod na použitie
Manual de instruções
Bruksanvisning
Руководство по эксплуатации
Работна инструкция
Οδηγίες χρήσης
Käyttöohje
A1
B2
B3
B4
B5
B6
B7
B8
B9
B1
B10
B11
B12
B13
A12
A13
A2
A3
A4
A5
A6
A7
A8
A10
A11
A9
C1 C2
C3
C6
C4
C5
2
GOperating instruction
Controls and Displays
A1 Outdoor temperature
A2 Outdoor humidity
A3 Temperatureand frost alarm
A4 Time and calendar display
A5 Moon phases
A6 Air pressuredisplay
A7 24-hour air pressuredisplay
A8 Room humidity
A9 Comfort display
A10 Room temperature
A11 Weather forecast
A12 Measuring station wireless symbol
A13 Wireless symbol
B1 “ / ”button =Display lighting, interrupt alarm signal
B2 “ ”button =Switch between seconds and date display/
Settings/Conrm setting value
B3 “ ”button =Set alarm time /Switch between alarm
time and date display
B4 “ ”button =Increase the current setting value /Toggle
between °C and °F /Activate/deactivate manual radio
signal reception
B5 “ ”button =Reduce the current setting value /Retrieve
values from individual outdoor radio sensors /Manually
search for the signal from the measuring station
B6 “ ”button =Temperaturealarm /Set temperaturelimits
for the temperaturealarm
B7 “ ”button =Set display brightness (5 levels) /Change
measurement unit for air pressure
B8 “MEM” button =Access/reset the stored maximum/
minimum values
B9 ON/OFF button =Switch alarm on/off
B10 Socket for power supply
B11 USB socket
B12 Battery compartment
B13 Recess for wall mounting
C1 Temperatureindicator
C2 Air humidity indicator
C3 Celsius /Fahrenheit setting key
C4 Channel setting key
C5 Battery compartment
C6 Cut-out for wall mounting
Thank you for choosing aHama product.
Take your time and read the following instructions and
information completely.Please keep these instructions in a
safe place for futurereference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw
your attention to specichazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
Risk of electric shock
This symbol indicates product parts energized with a
dangerous voltage of sucient magnitude to constitute a
risk of electric shock.
2. Package Contents
•Weather station (base station for indoors /measuring station
for outdoors)
•2xAAbatteries
•Power supply unit
•These operating instructions
3. Safety Notes
•The product is intended for private, non-commercial use
only.
•Use the product for its intended purpose only.
•Protect the product from dirt, moistureand overheating, and
only use it in adry environment.
•Do not use the product in the immediate vicinity of heaters
or other heat sources or in direct sunlight.
•Keep this product, as all electrical products, out of the reach
of children!
•Do not operate the product outside the power limits given in
the specications.
•Do not use the product in areas wherethe use of electronic
devices is not permitted.
•Do not use the product in moist environments and avoid
splashes.
•Do not place the product near interference elds, metal
frames, computers, TVs, etc. Electronic devices and window
frames can negatively affect the product’sfunctionality
•Do not drop the product and do not expose it to any major
shocks.
•Do not modify the product in any way.Doing so voids the
warranty.
•Keep the packaging material out of the reach of children due
to the risk of suffocation.
•Dispose of packaging material immediately according to
locally applicable regulations.
3
Risk of electric shock
•Do not open the device or continue to operate it if it
becomes damaged.
•Do not use the product if the AC adapter,adapter cable or
power cable is damaged.
•Do not attempt to service or repair the product yourself.
Leave any and allservice work to qualied experts.
Warning –Batteries
•When inserting batteries, note the correct polarity (+ and
-markings) and insert the batteries accordingly.Failureto
do so could result in the batteries leaking or exploding.
•Only use batteries (or rechargeable batteries) that match
the specied type.
•Beforeyou insert the batteries, clean the battery contacts
and the polar contacts.
•Do not allow children to change batteries without
supervision.
•Do not mix old and new batteries or batteries of adifferent
type or make.
•Remove the batteries from products that arenot being
used for an extended period (unless these arebeing kept
ready for an emergency).
•Do not short-circuit batteries.
•Do not charge batteries.
•Do not throw batteries in a re.
•Keep batteries out of the reach of children.
•Never open, damage or swallow batteries or allow
them to enter the environment. They can contain toxic,
environmentally harmful heavy metals.
•Immediately remove and dispose of dead batteries from
the product.
•Avoid storing, charging or using the device in extreme
temperatures and extremely low atmospheric pressure(for
example, at high altitudes).
4. Getting Started
Note
Beforeuse, ensureyou insert the batteries in the measuring
station rst and then in the base station.
4.1 Insert batteries /connect power supply
Measuring station
•Remove the screen protector from the display.
•Open the battery compartment (C5) and remove the contact
breaker.
•Then close the battery compartment cover.
Base station
Warning
•Connect the product only to asocket that has been
approved for the device. The socket must be installed close
to the product and must be easily accessible.
•Disconnect the product from the network using the power
button –ifthis is not available, unplug the power cord
from the socket.
•When using amulti-socket power strip, make surethat
the sum power draw of all the connected devices does not
exceed its maximum throughput rating.
•If you will not be using the product for along period of
time, disconnect it from mains power.
•Remove the screen protector from the display.
•Connect the power supply unit to the power supply unit
connection socket (B10) on the back of the base station.
•Connect the power cable of the weather station to aproperly
installed socket.
•Alternatively,open the battery compartment (B12), insert
two AA batteries with the correct polarity and close the
battery compartment cover.
Note
If the batteries areinserted correctly and you connect the
power supply unit to the station, the base station will
automatically switch to the external power supply.
4.2 Replacing the batteries
Note –Replacing the batteries
•Note that the stations have to be resynchronised each time
after you change the batteries in the measuring or base
station.
•To do this, remove the batteries from the other station and
then reinsert them, or change them as required.
Measuring station
•When the symbol appears, replace the 2AAbatteries for
the measuring station with 2new ones.
•Open the battery compartment (C5), remove and properly
dispose of the dead batteries and insert 2new AA batteries
with the correct polarity.Then close the battery compartment
cover.
Base station
•When the symbol appears, replace the 2AAbatteries for
the base station with 2new ones.
•Open the battery compartment (B12), remove and properly
dispose of the dead batteries and insert 2new AA batteries
with the correct polarity.Then close the battery compartment
cover.
4
5. Installation
Note –Installation
•We recommend initially placing the base and measuring
stations in the intended locations without installing them
and making allthe settings described in 6. Operation –
to do.
•Only install the stations once the appropriate settings have
been made and astable wireless connection is established.
Note
•The wireless transmission range between the measuring
and base stations is up to 50 minopen spaces.
•Beforeinstallation, ensurethat wireless transmission will
not be disrupted by interference or obstacles like buildings,
trees, vehicles, high-voltage lines, etc.
•Beforethe nal installation, ensurethat thereissucient
reception between the intended installation locations.
•When installing the measuring station, ensurethat it is
protected from direct sunlight and rain.
•The international standardheight for measuring air
temperatureis1.25 m(4ft) above ground.
Warning
•Buy special or suitable installation material from a
specialised dealer for wall-mounting.
•Ensurethat no faulty or damaged parts areinstalled.
•Never apply force during installation. This could damage
the product.
•Beforeinstallation, ensurethat the chosen wall is suitable
for the weight to be mounted, and make surethat there
arenoelectrical wires, water,gas or other lines at the
installation site on the wall.
•Do not mount the product above locations wherepersons
might linger.
5.1 Base station
•Use the base to position the base station on alevel surface.
•Alternatively,you can install the base station on awall using
the opening (B13) on the back.
5.2 Measuring station
•Youcan also position the measuring station on alevel
outdoor surface.
•We recommend installing the measuring station securely on
an outdoor wall (C6).
•Install an anchor,screw,nail, etc. in the wall of your choice.
•Hang up the base/measuring station using the opening
(B13/C6) intended for this purpose.
6. Operation
Note –Input
•Hold the button (B4) or the button (B5) to select the
values faster.
6.1 Connection to the measuring station
•After you insert the batteries, the base station automatically
searches for aconnection to the measuring station and
performs initial setup.
Note
•Initial setup takes approximately 3minutes.
•During the connection attempt, the radio symbol on the
measuring station (A12) will ash.
•Do not press any buttons during setup. Otherwise, values
may not be transmitted correctly and thereisarisk of
value errors and inaccuracies.
•The setup process is completed when the indoor and
outdoor measurement data (A1/A2/A8/A10) is displayed.
•If the base station still does not receive asignal from the
measuring station, press and hold the button (B5) for
approx. 3seconds to start the manual search for the signal.
Note –Faulty transfer of measured values
•In isolated cases, interference -e.g. from aWLAN network,
acomputer or atelevision set -can cause the transfer of
measured values between the measuring station and the
base station to fail.
•In this case, you must resynchronise the stations by briey
removing the batteries from both stations and reinserting
them.
•If the measured values arenot transferred again once the
batteries areinserted, replace the batteries with new ones.
•If necessary,select anew location for the base station in
order to avoid possible interference in the future.
6.2 Selecting the channel/other measuring stations
Note
Youcan install two moremeasuring stations in addition to
the included measuring station. Ensurethat the base and
measuring stations areset to the same channel.
•Press the button (B5) repeatedly to set the channel to that
set on the respective measuring station. Channel 1, 2or3
is displayed.
•If the symbol is displayed, the weather station will
automatically switch the displayed channel every ve
seconds.
